The Jem K1 Hazer is Martin's top-of-the-line hazer for high performance applications where a high level of reliability and easy serviceability is required. Feature-rich and of solid construction, the Jem K1 provides the ideal combination of continuous operation, long hang time, and low fluid consumption for greater economy.
|
| Features |
- Designed for service ease
- Continuous output
- Output and density level control
- 5000 m³/min haze output
- Integrated high velocity fan (variable fan speed)
- 600 W heat exchanger
- 2.5 liter fluid capacity
- Low fluid consumption and longer hang-time for greater economy
- Water based - no oil residue on light fixtures
- Automated shut-down procedure to prevent clogging
- On-board DMX, 3 & 5 pin
- On-board control panel
- Fast access set-up mode
- Optional digital remote control
- Silent Mode
- Eco mode extends run time and improves fluid economy
|
Physical |
| Length: 544 mm (21.4 in.) |
| Width: 459 mm (18.1 in.) |
| Height: 344 mm (13.5 in.) |
| Dry weight: 21.5 kg (47.4 lbs.) |
Performance |
| Coverage volume: 5000 m3 per minute |
| Max. operating time at full output (approx.): 17 hours |
| Operating time: Continuous, automatic level adjustment |
| Warm-up time (approx.): 5 minutes |
Control and Programming |
| Control options: Onboard control panel with 4-digit display |
| Control options: Instant or timer-controlled output, 0-100% adjustable output level |
| Control options: Adjustable Fan Speed Level |
| DMX channels: 2 (output and fan) |
| Optional digital remote control: 92765036 |
Construction |
| Housing: Steel & aluminum |
| Heat exchanger: 600 W, direct thermal protection |
Fluid System |
| Fluid pump: Oscillating piston, high pressure |
| Onboard fluid capacity: 2.5 l |
| Fluid consumption at peak output: 140 ml per hour |
| Compatible Fluids: K1 Haze Fluid |
Installation |
| Orientation: Floor or flying kit |
Connections |
| Power connection: Neutrik PowerCon |
| DMX data: 3-pin and 5-pin XLR sockets |
| Remote control: 3-pin locking XLR |
Electrical |
| AC power (EU models): 220-240 V nominal, 50 Hz |
| AC power (US models): 110-120 V nominal, 60 Hz |
| Main fuse (220-240 V power): 5 AT |
| Main fuse (110-120 V power): 10 AT |
Typical Power and Current |
| US model |
| 120 V, 60 Hz: 675 W, 6.0 A |
| EU model |
| 230 V, 50 Hz: 675 W, 3.1 A |
| Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
Thermal |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Exterior surface temperature, steady state: 40° C (104° F) |
| Max. nozzle temperature: 200° C (392° F) |
Approvals |
| EU EMC: EN 6100-6-3:2001 - Part 6-3 |
| EU safety: EN 60 335-1:2002 |
| Immunity: EN 61000-6-1:2001 - Part 6-1 |
| ETL approvals (cETLus): UL Std.998, CAN/CSA Std. C22.2 No 104-01 |
Accessories |
| ONLY FOR USE WITH K1 Hazer FLUID | |
|
| JEM K1 Hazer Remote Control | P/N 92765036 |
|
Ordering Information |
| Jem K1 Hazer, 110 V | P/N 92225900 |
|
| Jem K1 Hazer, 240 V | P/N 92225901 |
|
| |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
