The Exterior 200 LED is a long-life programmable luminaire offering full RGB + Amber and White color mixing. Weatherproofed for outdoor use, it features 44 high power LEDs and a choice of lens options.
|
| Features |
- 44 high power LEDs in 5 colors: Red, Green, Blue, Amber and white
- RGBAW color mixing, broader range of colors
- Choice of narrow, medium or wide beam options
- High optical performance: uniform distribution of light and color
- 0-100% intensity control
- Weatherproof rating: IP65
- DMX, stand-alone, synchronized (master/slave)
- Choice of DMX control modes: RGB, RGBAW, HSI, HSIC
|
|
Physical |
| Length: 169 mm (6.7 in.) including cable gland |
| Width: 307 mm (12.1 in.) |
| Height: 401 mm (15.8 in.) |
| Weight: 7.6 kg (16.8 lbs.) including bracket |
Dynamic Effects |
| Color mixing: RGBAW |
| Red: 0 - 100% |
| Green: 0 - 100% |
| Blue: 0 - 100% |
| Amber: 0 - 100% |
| White: 0 - 100% |
Optics |
| Light source: Luxeon K2 high power emitters |
| White LED: Neutral white, 3500 - 4500 K, CRI 75 |
| Minimum LED lifetime (to 50% of initial output level): 30 000 hours at full intensity |
| Very Narrow (no diffuser), Narrow, Medium and Wide beam angles available |
Control and Programming |
| Color control modes: RGBAW, RGB, HSI, HSIC |
| Control options: DMX, stand-alone, synchronized (master/slave) |
| DMX channels: 3, 4 or 5 |
| DMX address setting: PC with Martin MUM software and DABS1 hardware interface |
| Stand-alone trigger options: Internal timer and/or ambient light level |
| Stand-alone and master/slave programming: PC with Martin MUM software and DABS1 hardware interface |
| 26-bit control (internal): RGBAW, RGB, HSI, HSIC |
| Protocol: USITT DMX512-A |
| Receiver: RS-485 |
| Firmware update: Serial upload via DMX link |
Construction |
| Color: Clear anodized, white, custom colors to special order |
| Housing: Anodized aluminum |
| Mounting bracket: 8 mm (0.3 in.) anodized aluminum |
| Front glass: 6 mm (0.2 in.) anti-reflection coated |
| Protection rating: IP65 |
Installation |
| Orientation: Any |
| Vertical aiming: 330° |
| Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.) |
Connections |
| Power cable entry: IP68 cable gland |
| Power connection: 1.8 m (5.9 ft.) cable tail |
| Data cable entry: IP68 cable gland |
| Data connection: 1.8 m (5.9 ft.) combined input + output cable tail |
Electrical |
| AC power: 100-240 V nominal, 50/60 Hz |
| Standby power: 13 W |
| Power supply unit: Integrated, auto-sensing multi-voltage |
| Main fuse: 2.5 AT (slow blow) |
Typical Power and Current |
| 100 V, 50 Hz: 139 W, 1.4 A, PF 0.990 |
| 100 V, 60 Hz: 139 W, 1.4 A, PF 0.989 |
| 110 V, 60 Hz: 137 W, 1.3 A, PF 0.988 |
| 120 V, 60 Hz: 136 W, 1.2 A, PF 0.986 |
| 208 V, 60 Hz: 133 W, 0.7 A, PF 0.932 |
| 230 V, 50 Hz: 132 W, 0.7 A, PF 0.925 |
| 240 V, 50 Hz: 131 W, 0.7 A, PF 0.886 |
| Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. |
Thermal |
| Cooling: Convection |
| Maximum ambient temperature (Ta max.): 45° C (113° F) |
| Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F) |
| Maximum surface temperature, steady state, Ta=40° C: 90° C (194° F) |
| Total heat dissipation (calculated, +/- 10%): 860 BTU/hr. |
Approvals |
| |
| EU safety: EN 60598-1, EN 60598-2-1, IEC/EN 60825-1 |
| EU EMC: EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3 |
| US safety (US model): UL 1598 |
| Canadian safety (US model): CAN/CSA C.22.2 No. 250 |
Included Items |
|
| Narrow diffuser (installed) | P/N 41600110 |
|
| Medium diffuser (supplied with product) | P/N 41600111 |
|
| Wide diffuser (supplied with product) | P/N 41600112 |
|
|
Accessories |
| Narrow beam angle kit (diffuser sheet) | P/N 41600110 |
|
| Medium beam angle kit (diffuser sheet) | P/N 41600111 |
|
| Wide beam angle kit (diffuser sheet) | P/N 41600112 |
|
| Exterior 200 floor stand | P/N 91611305 |
|
| Safety eyebolt | P/N 91611239 |
|
| 3-pin male XLR connector, cable-type, IP65 | P/N 91611306 |
|
| 3-pin female XLR connector, cable-type, IP65 | P/N 91611307 |
|
Related Items |
| MUM (Multi Utility Manager) incl. DABS interface & cables | P/N 90758090 |
|
Spare Parts |
| 2.5 AT main fuse | P/N 05020010 |
|
Ordering Information |
| Exterior 200 LED, EU Model, Aluminum | P/N 90545000 |
|
| Exterior 200 LED, EU Model, White | P/N 90545002 |
|
| Exterior 200 LED, US Model, Aluminum | P/N 90545100 |
|
| Exterior 200 LED, US Model, White | P/N 90545102 |
|
| NB: All models now include Narrow diffuser (installed) and Medium and Wide diffusers supplied separately | |
|
| Custom colors available by special order - please contact us. | |
|
|
| Photometric Data |
Very Narrow (Balanced white 5600 Kelvin. Without diffuser) |
| Efficacy: 11.5 lumens per watt |
| Half-peak angle: 13° |
| Total output: 1500 lm |
Narrow (Balanced white 5600 Kelvin) |
| Efficacy: 10.7 lumens per watt |
| Half-peak angle: 21° |
| Total output: 1400 lm |
Medium (Balanced white 5600 Kelvin) |
| Efficacy: 9.8 lumens per watt |
| Half-peak angle: 27° |
| Total output: 1300 lm |
Wide (Balanced white 5600 Kelvin) |
| Efficacy: 7.4 lumens per watt |
| Half-peak angle: 32° |
| Total output: 970 lm |
| |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
