The Exterior 1200 series is a range of 1200 W luminaires designed for spectacular illumination of high-rise structures, bridges and landmark architecture.
|
| Features |
- 1200 W metal halide lamp
- CMY color mixing system
- Dynamic zoom for variable beam angles: 8°- 16° / 12°- 26°
- Choice of optical systems: narrow, medium, wide or very wide
- 0-100% intensity control
- High optical performance: uniform distribution of light and color
- Weatherproof rating: IP65
- DMX, stand-alone, synchronized (master/slave)
- On-board address setting: no extra devices required
|
|
Physical |
| Length: 860 mm (33.9 in.) |
| Width: 448 mm (17.6 in.) |
| Height: 620 mm (24.4 in.) |
| Weight: 68 kg (149.9 lbs.) |
| Effective Projected Area (EPA): 0.6 m2 |
Lamp |
| Type: 1200 W metal halide |
| Fitted as standard: Philips MSD 1200 |
| Socket: G22 |
| Control: Automatic and/or remote on/off |
Dynamic Effects |
| Color mixing: CMY |
| Cyan: 0 - 100% |
| Magenta: 0 - 100% |
| Yellow: 0 - 100% |
| Color wheel: Red, green, blue, CTC (as standard) + open positions |
| Dimmer: 0 - 100% |
| Zoom: 8°- 16° / 12°- 26° |
Control and Programming |
| Control options: DMX, stand-alone, synchronized (master/slave) |
| DMX channels: 8 |
| Stand-alone trigger options: Internal timer and/or ambient light level |
| Stand-alone memory: 20 scenes |
| DMX address setting: MUM, onboard control panel |
| Stand-alone programming: MUM, onboard control panel |
| Protocol: USITT DMX512-A |
| Receiver: RS-485 |
Construction |
| Housing: Aluminum |
| Finish: Clear anodized |
| Front glass: 6 mm (0.2 in.) anti-reflection coated |
| Protection rating: UL wet location, main enclosure designed to IP65 |
Installation |
| Orientation: Any (air intake must face down) |
| Vertical aiming: +/- 90° |
Connections |
| Power cable entry: IP68 cable gland |
| Power connection: Quick connectors |
| Data cable entry: IP68 cable gland |
| Data connection: RJ-45 sockets, screw terminal/quick connectors |
Electrical |
| AC power: 200/208/220/230/240/250/277 V nominal, 50/60 Hz |
| Main fuse: 17.5 AT (slow blow) |
| Ballast: Magnetic |
| Standby power: 18 W at 230 V |
Typical Power and Current |
| 200 V, 50 Hz: 1380 W, 7.0 A, PF 0.975 |
| 200 V, 60 Hz: 1405 W, 7.3 A, PF 0.960 |
| 208 V, 60 Hz: 1417 W, 7.1 A, PF 0.958 |
| 220 V, 50 Hz: 1373 W, 6.4 A, PF 0.973 |
| 230 V, 50 Hz: 1365 W, 6.1 A, PF 0.973 |
| 240 V, 50 Hz: 1370 W, 5.9 A, PF 0.973 |
| 250 V, 50 Hz: 1364 W, 5.6 A, PF 0.972 |
| 277 V, 60 Hz: 1417 W, 5.4 A, PF 0.956 |
| Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
Thermal |
| Maximum ambient temperature (Ta max.): 45° C (113° F) |
| Minimum ambient temperature (Ta min.): -20° C (-4° F), power must be maintained below 0° C (32° F) |
| Maximum surface temperature, steady state, Ta=45° C: 70° C (158° F) |
| Total heat dissipation (calculated, +/- 10%): 4950 BTU/hr. |
| Cooling: Forced air, integrated air/air heat exchanger, IP65 barrier |
Approvals |
| |
| US safety: UL 1598 |
| Canadian safety: CSA C22.2 No. 250.0-04 |
| EU safety: EN 60598-1, EN 61347-1 |
| EU EMC: EN 55 015, EN 55 103-1, EN 61 000-3 |
Included Items |
| Philips MSD 1200 lamp | P/N 97010313 |
|
| Two M16 x 1.5 IP68 cable glands, metal, cable Ø 5.5 mm (0.2 in.) - 10 mm (0.4 in.) | P/N 13102031 |
|
| One M20 x 1.5 IP68 cable gland, metal, cable Ø 8 mm (0.3 in.) - 13 mm (0.5 in.) | P/N 13102090 |
|
| Four M16 cable entry blanking plugs (installed), metal | P/N 13102050 |
|
| Two M20 blanking plugs (installed), metal | P/N 13103030 |
|
| Two main fuses, 17.5 AT (installed): | P/N 05020045 |
|
| Main PCB fuse, 10 AT (installed) | P/N 05020025 |
|
|
Accessories |
| Beamshaper lens | P/N 91610081 |
|
| Narrow-angle lens kit | P/N 91610088 |
|
| Medium-angle lens kit | P/N 91610089 |
|
| Wide-angle lens kit | P/N 91610090 |
|
| Very wide-angle lens kit | P/N 91610091 |
|
| Permanent CTC kit | P/N 91611258 |
|
| Snoot/barndoor kit | P/N 91611257 |
|
| Dichroic color filters (install in color wheel) | |
|
Related Items |
| MUM (Multi Utility Manager) incl. DABS interface & cables | P/N 90758090 |
|
Spare Parts |
| Philips MSD 1200 lamp | P/N 97010313 |
|
| 15 AT main fuse | P/N 05020050 |
|
| 15 AT main PCB fuse | P/N 05020039 |
|
| Silicone seal for front cover, Exterior 1200 IP & Wash | P/N 20600550 |
|
| Silicone seal for rear cover, Exterior 1200 IP & Wash | P/N 20600560 |
|
| Silicone seal for wiring box, Exterior 1200 IP & Wash | P/N 20620150 |
|
| Silicone seal for LCD display cover, Exterior 1200 IP & Wash | P/N 20620160 |
|
Ordering Information |
| Exterior 1200 Wash, Narrow | P/N 90504010 |
|
| Exterior 1200 Wash, Medium | P/N 90504020 |
|
| Exterior 1200 Wash, Wide | P/N 90504030 |
|
| Exterior 1200 Wash, Very Wide | P/N 90504040 |
|
|
| Photometric Data |
Narrow , Zoom at Minimum |
| Efficiency: 31% |
| Efficacy: 21 lumens per watt |
| Half-peak angle: 8° |
| Total output: 28600 lm |
Narrow , Zoom at Maximum |
| Efficiency: 31% |
| Efficacy: 21 lumens per watt |
| Half-peak angle: 16° |
| Total output: 28200 lm |
Narrow, Beamshaper , Zoom at Minimum |
| Efficiency: 29% |
| Efficacy: 19 lumens per watt |
| Half-peak angle, C0: 20° |
| Half-peak angle, C90: 8.5° |
| Total output: 26400 lm |
Narrow, Beamshaper , Zoom at Maximum |
| Efficiency: 26% |
| Efficacy: 18 lumens per watt |
| Half-peak angle, C0: 25° |
| Half-peak angle, C90: 17° |
| Total output: 24400 lm |
Medium , Zoom at Minimum |
| Efficiency: 22% |
| Efficacy: 15 lumens per watt |
| Half-peak angle: 11.5° |
| Total output: 20100 lm |
Medium , Zoom at Maximum |
| Efficiency: 31% |
| Efficacy: 21 lumens per watt |
| Half-peak angle: 26° |
| Total output: 28800 lm |
Wide |
| Efficiency: 38% |
| Efficacy: 25 lumens per watt |
| Half-peak angle: 42° |
| Total output: 34500 lm |
Very Wide |
| Efficiency: 37% |
| Efficacy: 25 lumens per watt |
| Half-peak angle: 46° |
| Total output: 33700 lm |
| |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
