EvenLED is a high-brightness modular system of RGB LED panels used together with a rear-projection material to create a completely even and flicker-free field of light over cycloramas and other semi-transparent projection surfaces.
|
| Features |
- 16 pixels per m2 enables easy creation of static and dynamic looks
- Optical Clarity: Evenly spaced, individually controlled 6 W RGB LEDs
- Optical Clarity: Totally smooth, even, and flicker-free illumination
- Extremely smooth dimming
- Cabling: Daisy-chained power and data
- Easy to assemble and rig; very service friendly
- Needs less than .5 m of stage depth
- Up to 10 m high, unlimited width
- Construction: Light-weight modules, easy to handle, cutting cost and time
- High efficiency, low power consumption, long lifetime
- Silent operation, little heat generated (no fans)
- DMX control
|
Physical |
| Height: 1014 mm (39.9 in.) |
| Width: 995 mm (39.2 in.) |
| Depth: 71 mm (2.8 in.) |
| Weight: 10 kg (22.0 lbs.) |
Control and Programming |
| Control: DMX |
| DMX channels: 96 per independently controlled panel |
| Control resolution: 16-bit control of each color |
| Protocol: USITT DMX512/1990 |
Photometric Data |
| Light source: Proprietary 6 W RGB LED array |
| Resolution, one fixture: 4 x 4 pixels |
| Pitch (pixel center-to-center): 250 mm (9.8 in.) |
| Pixels per m2: 16 |
| Color resolution: 16 bits per color |
| Viewing angle: 112° (+56°, -56°) |
| Minimum LED source lifetime (to 70% of initial output level): 40 000 hours at full intensity* |
| *LED manufacturer´s figure obtained under manufacturer´s test conditions |
Construction |
| Panels: Aluminum |
| Color: White |
| Protection rating: IP20 |
Installation |
| Orientation: Vertical |
| Mounting: Suspended using mounting rail and clamps only; max. 10 panels per suspended column |
Connections |
| Power in/out: Neutrik PowerCon |
| Data input: 5-pin locking XLR |
| Data output: 5-pin locking XLR |
| Data through: 5-pin locking XLR |
Electrical |
| AC power: 100-120/200-240 V nominal, 50/60 Hz |
| Power supply unit: Integrated, auto-sensing multi-voltage with integral current overload protection |
| Standby power: 24 W |
| Main fuse (not user-replaceable): F 6.3 A |
Typical Power and Current |
| 100 V, 50 Hz: 151 W, 1.6 A, PF 0.978 |
| 100 V, 60 Hz: 151 W, 1.6 A, PF 0.988 |
| 110 V, 60 Hz: 151 W, 1.4 A, PF 0.985 |
| 120 V, 60 Hz: 151 W, 1.3 A, PF 0.981 |
| 208 V, 60 Hz: 151 W, 0.8 A, PF 0.915 |
| 230 V, 50 Hz: 152 W, 0.8 A, PF 0.892 |
| 240 V, 50 Hz: 152 W, 0.7 A, PF 0.887 |
| PF = power factor |
| Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. |
Thermal |
| Cooling: Convection |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Minimum ambient temperature (Ta min.): 5° C (41° F) |
| Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) |
| Total heat dissipation (calculated, +/- 10%): 530 BTU/hr. |
Approvals |
| |
| EU safety: EN 60598-1, EN 60598-2-17, IEC/EN 60825-1 |
| EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3 |
| US safety: UL 1573 |
| Canadian safety: CAN/CSA C22.2 No. 60950-1 |
Included Items |
|
Accessories |
| 3 m (9.8 ft.) power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector | P/N 11541503 |
|
| Neutrik PowerCon NAC3FCA power input connector, cable mount, blue | P/N 05342804 |
|
| Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey | P/N 05342805 |
|
| PowerCon daisy-chain power cable, 1.4 m (4.6 ft.) | P/N 11850099 |
|
| PowerCon daisy-chain power cable, 2.25 m (7.4 ft.) | P/N 11850100 |
|
| PowerCon daisy-chain power cable, 3.25 m (10.7 ft.) | P/N 11850101 |
|
| Six-unit flightcase for 6 x EvenLED, 1 x 1 m (3.3 ft.) | P/N 91515005 |
|
Ordering Information |
| EvenLEDT panel, 1 x 1 m (3.3 ft.) | P/N 90354500 |
|
| EvenLEDT Hanging Bracket 1 m (3.3 ft.) wide | P/N 91602011 |
|
| EvenLEDT Software Uploader | P/N 90758097 |
|
| EvenLEDT DMX ThiefT Addressing Tool, EU model | P/N 90758096 |
|
| EvenLEDT DMX ThiefT Addressing Tool, US model | P/N 90758098 |
|