The Mania EFX700 is a dazzling 150 W discharge flower effect light with an incredibly wide spread and an array of vibrant colors to keep the dance floor jumping.
|
| Features |
- 150 W discharge lamp
- Long lamp life (6000 hrs)
- 12 colored gobos
- Manual focus
- Separate shutter for strobe effect
- Rotating parabolic mirror dish
- All major safety approvals CE, ETL and CETL
- Rigorously tested for total reliability
- DMX, stand alone (music or auto-trig) and master/slave function
- Continuous operation - no cool down time needed
- 12 pre-programmed macros for fast start-up
|
Physical |
| Length: 400 mm (15.7 in.) |
| Width: 500 mm (19.7 in.) |
| Height: 230 mm (9.1 in.) |
| Weight: EU model 14.1 kg (31.1 lbs.), US model 16.6 kg (36.6 lbs.) |
| All dimensions and weights include the supplied mounting plate. |
Lamp |
| Type: 150 W discharge |
| Approved lamps: Philips CDM SA-T 150, Osram HSD 150/70 |
| Socket: G12 |
Dynamic Effects |
| Motorized rotating parabolic mirror dish |
| Gobo wheel: 12 colored gobos |
| Mechanical dimmer/shutter: 0 - 100% dimming, strobe effects |
Optics |
| Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.) |
Control and Programming |
| Control options: DMX, stand-alone, synchronized (master/slave) |
| DMX channels: 4/6 |
| DMX address setting: Onboard control panel with 3-digit display |
| Macro programs selectable via DMX: 12 |
| Stand-alone trigger options: Music trig (selectable via control panel or via DMX), auto trig |
| Music trig sensitivity: Electronically adjustable |
| Protocol: USITT DMX512/1990 |
| Receiver: RS-485 |
| Firmware update: Serial upload via DMX link |
Construction |
| Housing: Steel and aluminum |
Installation |
| Mounting points: Adjustable mounting bracket |
| Orientation: Any |
Connections |
| AC power input: 3-pin IEC male socket |
| DMX data in/out: 3-pin locking XLR |
Electrical |
| AC power (US models): 110-120 V nominal, 60 Hz |
| AC power (EU models): 220-240 V nominal, 50 Hz |
| Main fuse (110-120 V power): 3.15 AT (slow blow) |
| Main fuse (220-240 V power): 2 AT (slow blow) |
Typical Power and Current |
| US model |
| 110 V, 60 Hz: 189 W, 1.8 A, PF 0.963 |
| 115 V, 60 Hz: 207 W, 1.9 A, PF 0.964 |
| 120 V, 60 Hz: 226 W, 2.0 A, PF 0.957 |
| EU model |
| 220 V, 50 Hz: 181 W, 0.9 A, PF 0.950 |
| 230 V, 50 Hz: 197 W, 1.0 A, PF 0.926 |
| 240 V, 50 Hz: 204 W, 1.0 A, PF 0.923 |
| Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
Thermal |
| Cooling: Forced air |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) |
| Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 650 / 670 BTU/hr. |
Approvals |
| |
| EU safety: EN 60598-1, EN 60598-2-17 |
| EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547 |
| US safety: UL 1573 |
| Canadian safety: CSA C22.2 No. 166 |
Included Items |
| Philips CDM-SA/T 150 W lamp (installed) | P/N 97010111 |
|
| Adjustable mounting bracket | |
|
| 5 m (16.4 ft.) data cable, 3-pin XLR | P/N 11820008 |
|
| 2 m (6.6 ft.) US power cable, 3 x 18 AWG, with UL approved US power plug (US model) | P/N 11501501 |
|
| 3 m (9.8 ft.) EU power cable, 3 x 1 mm2, IEC, Schuko mains plug (EU model) | P/N 11501017 |
|
| 3 m (9.8 ft.) EU power cable, 3 x 1 mm2, IEC, no mains plug (EU model) | P/N 11501013 |
|
|
Accessories |
|
| Half-coupler clamp | P/N 91602005 |
|
| DMX termination plug, 3-pin male XLR | P/N 91613017 |
|
| 5-pin male XLR to 3-pin female XLR adaptor | P/N 11820005 |
|
| Safety wire, safe working load 50 kg (110.2 lbs.) | P/N 91604003 |
|
Spare Parts |
| Philips CDM-SA/T 150 W lamp | P/N 97010111 |
|
| 3.15 AT 5x20mm main fuse (US models) | P/N 05020043 |
|
| 2 AT 5x20mm main fuse (EU models) | P/N 05020009 |
|
Ordering Information |
| Mania EFX700 US model, 110-120 V, 60 Hz | P/N 90430055 |
|
| Mania EFX700 EU model, 220-240 V, 50 Hz | P/N 90430054 |
|
| |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
