The MX-10 is a powerful 250 W discharge scanner with 12 replaceable colors, 8 interchangeable indexed-rotating gobos and a 3-facet prism for brilliant effects.
|
| Features |
- 250 W discharge lamp
- Long lamp life (3000 hrs)
- 12 interchangeable colors plus open
- Motorized focus
- 8 interchangeable indexable rotating gobos plus open
- Interchangeable 3-facet rotating prism
- Separate shutter for strobe effect
- High-speed mirror
- All major safety approvals CE, ETL and CETL
- Rigorously tested for total reliability
- DMX control
- Continuous operation - no cool down time needed
- 8 prism/gobo pre-programmed macros for fast start-up
|
Physical |
| Length: 735 mm (28.9 in.) |
| Width: 340 mm (13.4 in.) |
| Height: 315 mm (12.4 in.) |
| Weight: 22 kg (48.5 lbs.) |
Lamp |
| Type: 250 W discharge |
| Fitted as standard: Philips MSD 250/2 |
| Color temperature: 8500 K |
| Average lifetime: 3000 hours |
| Socket: GY 9.5 |
| Approved alternative lamp(s): Osram HSD 250, Philips MSD 200 |
Dynamic Effects |
| Color wheel: 12 colors (incl. UV transmitter) + open, full and split positions, random color, continuous rotation |
| Rotating gobo wheel: 8 interchangeable gobos + open, indexing, continuous rotation and shake |
| Prism: Interchangeable 3-facet rotating prism |
| Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout |
| Focus: Motorized, 2 m (6.6 ft.) to 20 m (65.6 ft.) |
| Pan: 230° |
| Tilt: 75° |
Control and Programming |
| Control options: DMX |
| DMX channels: 13 |
| Setting and addressing: Control panel with LED display |
| Macro programs selectable via DMX: 8 |
| Protocol: USITT DMX512/1990 |
| Receiver: Opto-isolated RS-485 |
| Firmware update: Serial upload via DMX link |
Photometric Data |
| Beam angle: 18° |
Construction |
| Housing: Polyester-reinforced composite |
| Color(s): Black |
| Protection rating: IP20 |
Gobos |
| Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) |
| Maximum image diameter: 17 mm (0.7 in.) |
| Maximum thickness: 1.8 mm (0.1 in.) |
| Glass type: High-temperature Borofloat or better |
| Glass coating: Dichroic or enhanced aluminum |
| Metal: Aluminum (steel for temporary use only) |
Installation |
| Orientation: Any |
| Mounting points: Floor or adjustable mounting bracket |
Connections |
| Data connection: 3-pin locking XLR |
| Power cable entry: 3-pin IEC |
Electrical |
| AC power: Switch-selectable 100-120/208-240 V nominal, 50/60 Hz |
| Main fuse: 6.3 AT (slow blow) |
Typical Power and Current |
| 100 V, 60 Hz: 340 W, 4.1 A |
| 120 V, 60 Hz: 340 W, 2.9 A |
| 208 V, 60 Hz: 340 W, 1.8 A |
| 230 V, 50 Hz: 360 W, 1.8 A |
| 240 V, 50 Hz: 350 W, 1.6 A |
| Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
Thermal |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Maximum surface temperature, steady state, Ta=40° C: 50° C (122° F) |
| Typical heat dissipation (calculated): 1230 BTU/hr. |
Approvals |
| |
| EU safety: EN 60598-1, EN 60598-2-17 |
| EU EMC: EN 50 081-1, EN 50 082-1 |
| US safety: ANSI/UL 1573 |
| Canadian safety: CSA C22.2 No. 166 |
Included Items |
| Philips MSD 250/2 lamp (installed) | P/N 97010100 |
|
| 3 m (9.8 ft.) power cable, 3-pin IEC | P/N 11501013 |
|
|
Accessories |
| 5-facet rotating prism in holder | P/N 91611062 |
|
| 9-facet rotating prism in holder | P/N 91611063 |
|
|
| Half-coupler clamp | P/N 91602005 |
|
Spare Parts |
| Philips MSD 250/2 lamp | P/N 97010100 |
|
| Replacement mirror assembly | P/N 62333029 |
|
| Main fuse (6.3 AT) | P/N 05020020 |
|
| Fuse F1 (6.3 AT) | P/N 05020020 |
|
| Fuse F2 (2 AT) | P/N 05020009 |
|
Ordering Information |
| MX-10 Extreme | P/N 90145400 |
|
|
| Photometric Data |
Standard |
| Efficiency: 23% |
| Half-peak angle: 10.5° |
| Total output: 4100 lm |
| |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
