The Impact 65T is a passive two-way loudspeaker using two 5" low frequency drive units matched to two 1" neodymium ferrofluid cooled HF tweeters with an internal passive crossover network and including an internal line transformer.
The Impact 65T will provide high quality sound reproduction from an unobtrusive cabinet, available in black or white and designed to blend effectively into any decor. It is supplied with a multi-tapped internal line transformer for use in 70 volt line and 100 volt line distributed systems, and includes a low impedance setting. The low frequency range of the Impact 65T can easily be extended with the TSB-110.
The Impact 65T is supplied with an adjustable wall mounting bracket which provides the loudspeaker connections as an integral part of the bracket assembly. This facility allows the brackets to be sited, installed and wired independently of the loudspeakers being available on-site, making the final installation and commissioning of the loudspeaker system a greatly simplified and considerably faster process. The cabinet also provides M6 fixings for use with CB-10 wall brackets, WB-10 ceiling brackets and OmniMount™ brackets. A 3/8" threaded insert is provided behind an EPDM rubber cover on the bottom of the cabinet for use with microphone stands as a spot monitor.
| Net Weight | 5kg (11lbs) |
|---|
| Dimensions | 450mm x 164mm x 158mm (17.7" x 6.5" x 6.2") |
|---|
| Components | 2 x 5" (127mm) LF drivers, 2 x 1" (25mm) ferrofluid-cooled neodymium HF tweeters |
|---|
| Frequency Response | 74Hz - 18kHz ±3dB, 43Hz - 20kHz ±10dB |
|---|
| Dispersion | 100°H x 70°V @ -6dB points |
|---|
| Power Handling | 120 watts continuous, 240 watts program |
|---|
| Sensitivity | 90dB SPL, 1 watt @ 1metre |
|---|
| Maximum SPL | 111dB continuous, 117dB peak |
|---|
| Impedance | 8 ohms |
|---|
| Crossover | Internal passive crossover at 4.5kHz, 12dB/octave |
|---|
| Construction | Gas injected, glass-filled moulded ABS enclosure |
|---|
| Grille | Powder-coated galvanised perforated steel |
|---|
| Connectors | Colour coded binding posts |
|---|
| Flying Hardware | (2) M6 fixing points for WB-5 wall bracket (supplied). Compatible with WB-10 wall brackets, CB-10 ceiling brackets, and OmniMount™ brackets |
|---|
| Options | Available colours: White, Black |
|---|
| Spares & Accessories | LS-51 LF driver
TW-52 HF tweeter
MG-IMP65 Metal grille
WB-5 Adjustable wall bracket
WB-10 Wall bracket
CB-10 Ceiling bracket |
|---|
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
