Farralane.com - Turbosound NuQ-8 Passive Two-Way Loudspeaker

The NuQ-8 is a compact passive full range two-way loudspeaker system designed to be used with Turbosound LMS series digital loudspeaker management systems, providing optimum system performance.

NuQ systems can be controlled over a BVNet network using TurboDrive^™ control software. It consists of a front loaded 8" neodymium LF driver and a 1.4" neodymium HF compression driver on a rotatable 100°H x 60°V Converging Elliptical Waveguide^™, matched with an internal passive crossover network in a reflex-loaded enclosure, giving excellent pattern control and allowing a swap of horizontal and vertical coverage patterns.

The trapezoidal enclosure is uniquely formed out of pre-bent plywood, which entirely eliminates four cabinet joints and provides additional benefits of superior strength, low weight and reduced internal reflections. The symmetrical shape creates an additional role as mirrored left/right monitor wedges. The cabinet includes a steel mesh grille backed with reticulated foam, and is finished in black or optional white textured paint, and includes rigging points for use with optional flying yokes and wall brackets, as well as being compatible with OmniMount^™ loudspeaker brackets. A pole mount socket is fitted for use with 35mm poles and speaker stands. The rear panel connector plate carries two Neutrik Speakon NL4MP connectors for loop in and loop out connections to additional enclosures.

Net Weight	10kg (22lbs)
Dimensions	464mm x 272mm x 220mm (18.3" x 10.7" x 8.7")
Components	1 x 8" (203mm) LF driver, 1 x 1" (25mm) HF driver on a Converging Elliptical Waveguide™
Frequency Response	60Hz - 20kHz ±4dB
Dispersion	100°H x 60°V@-6db points. Rotatable waveguide allows swap of horizontal and vertical pattern
Power Handling	250 watts continuous, 500 watts program
Sensitivity	94dB, 1 watt @ 1 metre
Maximum SPL	118dB continuous, 124dB peak
Impedance	8 ohms
Crossover	Internal passive crossover at 4kHz
Construction	12mm (1/2") birch plywood; rebated, screwed and glued. Finished in black semi-matt textured paint. One recessed carrying handle. Integral pole mount socket
Grille	Powder coated perforated steel with acoustically transparent reticulated foam
Connectors	(2) Speakon NL4MP, wired pin1+: positive, pin1-: negative, pins 2+ and 2- n/c
Flying Hardware	M8 rigging points for WB-20B wall brackets and OmniMount^™ 20.5 series brackets M8 rigging points for NuQ-SB8 swivel brackets M10 rigging points for NuQ-FY8 flying yokes and EB-10 shoulder eyebolts
Options	White textured paint
Spares & Accessories	LS-8093 8" (203mm) LF loudspeaker RC-8093 Recone kit CD-115 1" (25mm) HF compression driver RD-115 Replacement HF diaphragm PX-NuQ8 Crossover network MG-NuQ8 Replacement grille WB-20B Wall bracket NuQ-FY8 Flying yoke NuQ-SB8 Swivel bracket PB-55 Wall bracket, pole mount fixing