Farralane.com - Turbosound NuQ-10 Active/Passive Two-Way Loudspeaker

The NuQ-10 is a passive full range two-way loudspeaker system designed to be used with Turbosound LMS series digital loudspeaker management systems, providing optimum system performance. NuQ systems can be controlled over a BVNet network using TurboDrive^™ control software.

It consists of a front loaded 10" neodymium LF driver and a 1." neodymium HF compression driver on a rotatable 100°H x 60°V Converging Elliptical Waveguide^™, matched with an internal passive crossover network in a reflex-loaded enclosure, giving excellent pattern control and allowing a swap of horizontal and vertical coverage patterns. The trapezoidal enclosure is uniquely formed out of pre-bent plywood, which entirely eliminates four cabinet joints and provides additional benefits of superior strength, low weight and reduced internal reflections.

The symmetrical shape creates an additional role as mirrored left/right monitor wedges. The cabinet includes a steel mesh grille backed with reticulated foam, and is finished in black or optional white textured paint and includes rigging points for use with optional flying yokes and wall brackets, as well as being compatible with OmniMount^™ loudspeaker brackets. A pole mount socket is fitted for use with 35mm poles and speaker stands. The rear panel connector plate carries two Neutrik Speakon NL4MP connectors for loop in and loop out connections to additional enclosures.

Net Weight	12.5kg (27.5lbs)
Dimensions	525mm x 318mm x 258mm (20.7" x 12.5" x 10.2")
Components	1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF driver on a Converging Elliptical Waveguide^™
Frequency Response	55Hz - 20kHz ±4dB
Dispersion	100°H x 60°V@-6db points. Rotatable waveguide allows swap of horizontal and vertical pattern
Power Handling	300 watts continuous, 600 watts program
Sensitivity	96dB, 1 watt @ 1 metre
Maximum SPL	121dB continuous, 127dB peak
Impedance	8 ohms
Crossover	Internal passive crossover at 2k5Hz; 24dB/octave Butterworth
Construction	12mm (1/2") birch plywood; rebated, screwed and glued. Finished in black semi-matt textured paint. One recessed carrying handle
Grille	Powder coated perforated steel backed with acoustically transparent reticulated foam
Connectors	(2) Speakon NL4MP, wired pin 1+: positive, pin 1-: negative, pins 2+ and 2- n/c
Flying Hardware	M8 rigging points for WB-20B and OmniMount^™ brackets M8 rigging points for NuQ-SB10 swivel brackets M10 rigging points for NuQ-FY10 flying yokes and M10 eyebolts
Options	White textured paint
Spares & Accessories	LS-1024 10" (254mm) LF loudspeaker RC-1024 Recone kit CD-115 1" (25mm) HF compression driver RD-115 Replacement HF diaphragm PX-NuQ10 Crossover network MG-NuQ10 Replacement grille WB-20B Wall bracket NuQ-SB10 Swivel bracket NuQ-FY10 Flying yoke PB-55 Wall bracket, pole mount fixing