The NuQ-15 is a switchable active/passive full range two-way loudspeaker system designed to be used with Turbosound LMS series digital loudspeaker management systems, providing optimum system performance. NuQ systems can be controlled over a BVNet network using TurboDrive™ control software.
It consists of a front loaded 15" neodymium LF driver and a 1.4" neodymium HF compression driver on a rotatable 80°H x 50°V Converging Elliptical Waveguide™, matched with an internal passive crossover network in a reflex-loaded enclosure, giving excellent pattern control and allowing a swap of horizontal and vertical coverage patterns. The symmetrical shape creates an additional role as mirrored left/right monitor wedges. Bi-amp mode can be enabled by means of a rear panel switch.
The trapezoidal enclosure is uniquely formed out of pre-bent plywood, which entirely eliminates four cabinet joints and provides additional benefits of superior strength, low weight and reduced internal reflections. The cabinet includes a steel mesh grille backed with reticulated foam, and is finished in black or optional white textured paint and includes rigging points for use with optional flying yokes and wall brackets, as well as being compatible with OmniMount™ loudspeaker brackets. A pole mount socket is fitted for use with 35mm poles and speaker stands.
The rear panel connector plate carries two Neutrik Speakon NL4MP connectors for loop in and loop out connections to additional enclosures.
| Net Weight | 26kg (57.2lbs) |
|---|
| Dimensions | 712mm x 430mm x 385mm (28" x 16.9" x 15.2") |
|---|
| Components | 1 x 15" (381mm) LF driver, 1 x 1.4" (35mm) HF driver on a Converging Elliptical Waveguide™ |
|---|
| Frequency Response | 50Hz - 20kHz ±4dB |
|---|
| Dispersion | 80°H x 50°V @-6db points. Rotatable waveguide allows swap of horizontal and vertical pattern |
|---|
| Power Handling | Passive: 600 watts continuous, 1200 watts program
Recommended amplifier power: 1200 watts @ 8 ohms
Bi-amp: LF 500 watts continuous, 1000 watts program
HF 100 watts continuous, 200 watts program |
|---|
| Sensitivity | 100dB, 1 watt @ 1 metre |
|---|
| Maximum SPL | 129dB continuous, 135dB peak |
|---|
| Impedance | Passive: 8 ohms, Bi-amp LF: 8 ohms, HF: 6 ohms |
|---|
| Construction | 15mm (5/8") birch plywood; rebated, screwed and glued. Finished in black semi-matt textured paint. Two recessed carrying handles. Pole mount socket |
|---|
| Grille | Powder coated perforated steel with acoustically transparent reticulated foam |
|---|
| Connectors | (2) Speakon NL4MP, wired pin 1+: positive, pin 1-: negative, pins 2+ and 2- n/c |
|---|
| Flying Hardware | M8 rigging points for WB-55B wall brackets
M6 rigging points for OmniMount™ brackets
M10 rigging points for flying yokes and eyebolts |
|---|
| Options | White textured paint |
|---|
| Spares & Accessories | LS-1528 15" (381mm) LF loudspeaker
RC-1528 Recone kit
CD-213.2 1.4" (35mm) HF compression driver
RD-213.2 Replacement diaphragm
PX-NuQ15 Crossover network
MG-NuQ15 Replacement grille
WB-55B Wall bracket
NuQ-FY15 Flying yoke
PB-55 Wall bracket, pole mount fixing |
|---|
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
