Farralane.com - Numark 5000FX

THE ULTIMATE TABLETOP MIXER FOR THE PRO DJ.

Harnessing the power of Numark's custom digital processing legacy, the 5000FX is a 5–channel tabletop mixer (with 3 phono, 9 line and 2 mic inputs) that allows you to control the most complex mix situations. With patented Beatkeeper™ technology, a DJ can auto–detect BPM and simultaneously manipulate a mix from 2 different sources. The unit's on–board sampler (with 30 seconds of memory) and multi–effects processing capability gives additional options, including smart loop and BPM synchronization. DJs can also scratch any audio source utilizing the unit's scratch/effect/pitch wheel.

Offering superior audio effects and the most accurate BPM display on the market, the Numark 5000FX sets a new standard in tabletop mixers, delivering all the bells and whistles you'll ever need in one powerful package.

12" tabletop configuration
5 input channels with 3 phono, 9 line (3 switchable to phono), and 2 mics
Master balanced, unbalanced, XLR, 2 zone and 1 S/PDIF outputs
Dual Beatkeeper™ units to auto–detect BPM from 2 sources
BPM alignment of effects and loops
Effects processor with interactive scratch/effect/pitch wheel
Effects include: Scratch, Sonar, Chop, Echo, Delay, Filter with Vocal kill
Pitch/Key shift, Distort with Vocoder
18 Second audio buffering for Scratching and Reverse Audio with Bleep effect
Onboard sampler with 30 seconds of memory, smart looping, and BPM synchronization
Optional rack ears available

Inputs

Line: 10Kohm input impedance; 83mV rms sensitivity for 1.22V output
Mic: 600 ohm input impedance unbalanced; 1.9mv rms sensitivity for 1.22V output; 200mV rms max input
Phono: 47Kohm input impedance; 1.3mV rms sensitivity @1KHz for 1.22V output

Outputs

Line: 6.5V rms max
Headphone: 0.5W into 47 ohm
Distortion: less than 0.01%

Signal to Noise Ratio (maximum output || JIS-A weighted)

Line: Better than 82dB
Mic: Better than 80dB
Phono: Better than 72dB

Frequency Response

Line: 20Hz-20KHz ±0.5dB
Mic: 20Hz-15KHz ±0.5dB
Phono: ±1dB except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback

Channel Equalizer

Bass: +6/-32dB @40Hz
Middle: +6/-32dB @1.35KHz
Treble: +6/-32dB @15KH
Channel Kill: 80dB at 20Hz-20KHz

General

Power Consumption: 24 Watts typical; 29 Watts with full headphone output
Dimensions (W x D x H): 320mm x 355mm x 100mm
Weight: 6.1 kgs

Sampler

The maximum sample length is 36 seconds, total available buffer is 48 seconds, and buffer not used for sampler is used for echo, delay, scratch, reverse, and bleep effects. The sampler will automatically stop recording once the record time exceeds 36 seconds.