AMX DX-RX-4K60-TAA - DXLink TAA-Compliant 4K60 HDMI Receiver Module with UHD and DHCP in Black Finish

The AMX DX-RX-4K60-TAA is a cutting-edge DXLink 4K60 HDMI Receiver Module that is fully TAA-compliant, making it suitable for government and other regulated environments. This receiver module is designed to handle ultra-high-definition video, supporting up to 4K60 with 4:4:4 color sampling, ensuring that users receive the highest quality image output with no compromise. With built-in SmartScale Technology, the DX-RX-4K60-TAA automatically adjusts the output resolution to match the capabilities of the connected display, ensuring optimal video scaling without any manual configuration. This innovative feature helps eliminate the typical integration challenges associated with varying source and display resolutions, making the setup process simpler and more efficient.

Supporting HDMI 2.0 and HDCP 2.2, the DX-RX-4K60-TAA ensures compatibility with the latest 4K sources and displays, allowing users to experience the full potential of high-definition video content. The module can deliver up to 18 Gbps of video data, enabling smooth 4K60 4:4:4 video with no chroma subsampling. It also supports High Dynamic Range (HDR10) and Deep Color up to 36 bits, providing a more vibrant and detailed visual experience with enhanced contrast and color accuracy.

As part of AMX's comprehensive DXLink solution, the DX-RX-4K60-TAA allows audio, video, control, Ethernet, and USB 2.0 to be transmitted over a single, cost-effective twisted pair cable, streamlining the installation process. This all-in-one solution reduces the need for multiple cable runs, which are typically required by other AV solutions, significantly lowering both installation complexity and cost. The DX-RX-4K60-TAA also supports USB 2.0 pass-through, allowing for the connection of USB peripherals such as keyboards, mice, and web cameras, further simplifying system integration.

In addition to the video capabilities, the DX-RX-4K60-TAA features several built-in control options for managing destination devices. The module includes IR control ports, a serial RS-232 port, and an ICS LAN port for IP network access, all of which can be used to control connected devices. This integration with AMX's NetLinx control system provides users with the ability to manage their AV systems remotely and efficiently. When used in conjunction with AMX's Enova DGX Digital Media Switchers, the DX-RX-4K60-TAA can also pass EDID data from the sink device, ensuring that the source device receives the correct display parameters.

Perfect for professional AV installations that require long-distance transmission of 4K video and audio, the DX-RX-4K60-TAA is capable of handling video signals over distances of up to 230 feet with shielded Cat6A or Cat7 cable, supporting 4K formats. For applications that require even longer runs, the module can support resolutions up to 1080p over distances of up to 328 feet. This versatile solution works seamlessly with other AMX products, including the Enova DGX 800/1600/3200/6400 Digital Media Switchers, the Enova DVX-4K Presentation Switchers, and DX-TX-4K60 Transmitters, offering flexibility in both point-to-point and matrix switching configurations.

The DX-RX-4K60-TAA is designed with reliability and efficiency in mind, featuring a robust construction that ensures stable performance in demanding environments. It is compatible with AMX's V-Style mounting options, allowing for flexible installation in racks, on surfaces, or on poles. The receiver module also includes a desktop power supply, but it can be powered through Power over DXLink (PoE) if preferred, adding even more flexibility to the installation process.

The DX-RX-4K60-TAA meets stringent regulatory standards, including FCC, CE, RoHS, and WEEE compliance, ensuring that it adheres to global safety and environmental requirements. With its exceptional video quality, flexible connectivity options, and reliable performance, the DX-RX-4K60-TAA is an ideal solution for professional AV systems that demand the best in 4K video delivery.

Features

• Supports 4K60 4:4:4 video with HDR10 and Deep Color up to 36 bits for the highest quality video output
• Compatible with HDMI 2.0 and HDCP 2.2 for seamless integration with modern 4K sources and displays
• SmartScale Technology automatically adjusts resolution to match connected displays, eliminating resolution mismatches
• Transmits audio, video, control, USB 2.0, and Ethernet over a single twisted pair cable, simplifying installation
• Supports USB 2.0 pass-through for peripherals such as keyboards, mice, and web cameras
• Includes built-in IR control ports, RS-232, and ICS LAN for flexible control of destination devices
• HDBaseT compatible for integration with third-party HDBaseT devices
• Supports resolutions up to 4K60, including 4:4:4 and 4:2:0 formats
• Supports 1080p video up to 328 feet and 4K video up to 230 feet with shielded Cat6A or Cat7 cable
• Includes desktop power supply or supports Power over DXLink (PoE) for flexible power options
• Compatible with AMX Enova DGX and DVX Digital Media Switchers for seamless integration into large AV systems
• Regulatory compliance with FCC, CE, RoHS, and WEEE for global safety and environmental standards

Specifications

General

• Dimensions (HWD): 1 x 8.67 x 6.13 inches
• Weight: Approx. 2.2 lbs
• Mounting Options: Compatible with all V Style versatile mounting options including rack, surface, or pole
• Transport Layer Throughput (Max): 10.2 Gbps
• Compatible AMX Products:
  • Enova DGX 800/1600/3200/6400 Digital Media Switchers
  • Enova DVX-2265-4K, DVX-3266-4K All-In-One Presentation Switchers
  • DX-TX-4K60 as a point-to-point solution
  • PS-POE-AT-TC High Power PoE Injector
  • PDXL-2 Power over DXLink Controller
• Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7
• Twisted Pair Cable Length: For shielded Cat6A and Cat7, up to 230 ft
• Airflow: Convection (openings on top of case)
• Regulatory Compliance: FCC, CE EN 55032, CE EN 55035, CE EN 61000-3, ICES-003, IEC 62368-1, UL 62368-1, UL 60950-1, RCM, RoHS/REACH/WEEE Compliance
• Included Accessories: Each DXLink 4K60 RX ships with a desktop power supply with power cord, 1 IR emitter, 1 IR receiver, 4 rubber feet, and 2 mounting brackets with screws
• Optional Accessories:
  • AVB-VSTYLE-SURFACE-MNT, V Style Module Surface Mount (FG1010-722)
  • AVB-VSTYLE-RMK-1U, V Style Module Tray (FG1010-720)
  • AVB-VSTYLE-RMK-FILL-1U, V Style Module Tray w/Fill Plates (FG1010-721)
  • AVB-VSTYLE-POLE-MNT, V Style Module Pole Mount (FG1010-723)
  • CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
  • IR03, External IR Receiver Module (FG-IR03)
  • PS-POE-AT-TC High Power PoE Injector (FG423-84)
  • PDXL-2 Power over DXLink Controller (FG1090-170)

Power Supply

• External, Included: Each DXLink 4K60 RX ships with a desktop power supply with power cord
• AC Power: 100-240 VAC single phase, 50-60 Hz, 0.6 A @ 115 VAC max
• Power Consumption (Max):
  • Local 12V supplied: 18.2W
  • Power over DXLink supplied: 20.2W
• External, Optional: Power can also be supplied by a DXLink Power sourcing device such as:
  • Enova DGX 800/1600/3200/6400 Digital Media Switchers (with a DXLink 4K60 Twisted Pair Output Board installed)
  • Enova DVX-4K All-In-One Presentation Switcher (DVX-3266-4K or DVX-2265-4K)
  • PS-POE-AT-TC High Power PoE Injector
  • PDXL-2 Power over DXLink Controller
• When installed in conjunction with an Enova DGX, use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration

Environmental

• Temperature (Operating): 32°F to 104°F
• Temperature (Storage): 4°F to 158°F
• Humidity (Operating): 5% to 85% RH (non-condensing)
• Humidity (Storage): 0% to 90% RH (non-condensing)
• Thermal Dissipation (Max):
  • Local 12V supplied: 61 BTU/HR
  • Power over DXLink supplied: 69 BTU/HR

Front Connectors

• None

Back Connectors

• HDMI Output: HDMI Type A Female
• Analog Stereo Output: 3.5mm Mini-Stereo Jack
• ICS LAN/Ethernet Port: RJ-45 Connector, TCP/IP Port (ICS LAN 10/100)
• IR RX: 3.5mm Mini-Stereo Jack, Port for IR03 Receiver (Optional)
• IR TX: 3.5mm Pluggable Phoenix Terminal Block, Port for IR01 Emitter (Optional)
• Serial: 3.5mm Pluggable Phoenix Terminal Block, Bidirectional RS-232, Standard NetLinx Baud Rate 1200-115k, Parity support Odd/Even/None
• USB 2.0:
  • (1) USB 2.0 Type A connector for USB peripheral device
  • (1) USB 2.0 Type B connector for Host
  • Either Host or peripheral device active based on front USB mode switch selections
• DXLink Output: RJ-45 Connector
• Local Power: Screw down locking power connector

USB

• USB Transport:
  • (1) USB Type A connector for USB peripheral device
  • (1) USB Type B connector for Host
  • USB HID and USB 2.0 are supported point-to-point to a DXLink 4K60 Twisted Pair Transmitter
  • When used in conjunction with an Enova DGX Digital Media Switcher (with a DXLink 4K60 Twisted Pair Output Board installed) or an Enova DVX-4K Presentation Switcher, USB HID and USB 2.0 are supported point-to-point
  • The USB A/B port on Enova DGX DXLink 4K60 Output Board or Enova DVX-4K presentation switcher is automatically configured as either Host or Device depending on the mode selected on the attached DXLink 4K60 Transmitter

Controls and Indicators

• ID Pushbutton: Toggle between DHCP and static IP addressing, Places system in NetLinx Device ID assignment mode, Reset the factory default settings, Restore the factory firmware image
• Power Indicator: (1) LED (green) indicates whether the module is powered on
• LINK/ACT: (1) LED (green) lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
• Status: (1) LED (green) lights when the Controller is programmed and communicating properly
• HDCP: (1) LED (Yellow) blinks when Non-HDCP content is transmitted, solid ON when HDCP content is transmitted
• Scaler Indicator: (1) LED (Blue) lights when in auto or manual scaling mode
• DIP Switch: NOTE: See full introduction in the DXLink Twisted Pair 4K60 Transmitters/Receiver Quick Start Guide
• USB Mode Switch: Settable USB Directional Control - Enables USB Host or Peripheral Device For USB 2.0 Pass-through

HDMI

• Compatible Formats: HDMI2.0, HDCP2.2, DVI (DVI requires adapter cable)
• Output Signal Type: HDMI, DVI-D (Single Link with Cable Adapter)
• Output Connector: HDMI Type A Female
• Output Scaling: SmartScale, Manual Configuration, or Bypass
• SmartScale Output Resolution Support: All resolutions between 480p and 4096x2160 @ 60 Hz via automatic SmartScale query of the display's preferred EDID Detailed Timing Definition
• Propagation Delay (Typ): 25 ms when scaling; 5 us when in Bypass mode
• Output Voltage (Nominal): 1.0 Vpp Differential
• Output Re-clocking: Yes
• +5V DDC Pin Output: 50 mA when using Enova DXLink Power, 500 mA when using local 12V supply
• +5V USB Output: 150 mA when using Enova DXLink Power, 500 mA when using local 12V supply
• Output Rise Time / Fall Time: 70 ps typ (20% - 80%)
• HDMI Audio Synchronization:
  • Video Formats @ 60Hz frame rate: In scaling mode, Audio lags video by 25ms typ. In bypass mode, Audio lags video by 18ms
  • Video Formats @ 30Hz frame rate: In scaling mode, Audio lags video by 8ms typ. In bypass mode, Audio lags video by 15ms
• Video Data Rate (Max): 18 Gbps
• Video Pixel Clock (Max): 600 MHz
• Progressive Resolution Support: 480p up to 4096x2160 @ 60 Hz (including but not limited to those resolutions shown in the DXLink Twisted Pair 4K60 Transmitters/Receiver Hardware Reference Manual)
• Interlaced Resolution Support: 480i, 576i, 1080i (including but not limited to those resolutions shown in the DXLink Twisted Pair 4K60 Transmitters/Receiver Hardware Reference Manual)
• 4K Resolution Support:
  • 3840x2160p@24/25/30 Hz
  • 4096x2160p@24/25/30 Hz
  • 3840x2160p@60 Hz, 4:2:0
  • 4096x2160p@60 Hz, 4:2:0
  • 3840x2160p@60 Hz, 4:4:4*
  • 4096x2160p@60 Hz, 4:4:4*
  * Supported by DX-RX-4K60 HDMI output when in Auto/Manual scaling mode
• Deep Color Support: 24-bit, 30-bit, 36-bit
• Color Space Support: RGB 4:4:4, YCbCr 4:4:4, 4:2:2, and 4:2:0
• Audio Format Support:
  • Dolby TrueHD, Dolby Digital, DTS-HD MA, DTS, 2 CH through 8 CH L-PCM
  • Dolby Digital and DTS support up to 48kHz, 5.1 channels
• Audio Resolution: 16 bit to 24 bit
• Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
• HDCP Support: Yes, HDCP1.4, HDCP2.2
  • Supports AMX HDCP InstaGate Pro Technology
  • When used with an AMX Digital Media Switcher, the key support is up to max 31 sinks per output, independent of source device
  • When used as a single point-to-point solution the key support is defined by the source device
• CEC Support: Yes
• DDC/EDID Support: EDID in point-to-point mode is passed up from the sink Device
  • When used with Enova DGX 800/1600/3200/6400 Digital Media Switcher or Enova DVX-4K Presentation Switcher, the EDID is read from the switcher and presented to the source through the TX on the digital HDMI connector
  • The digital HDMI input EDID is user re-programmable via the switcher

Analog Audio

• Output Signal Types: Stereo Analog (Video signal must be present to pass Audio)
• Analog Audio Output Level (Max): +1.6 dBu, unbalanced, >= 2 kohm load
• Analog Audio Output Frequency Response: <+0.2 dB to -0.8 dB, 20 Hz to 20 kHz
• Analog Audio Output THD+N: <0.2%, 1 kHz, -10 dBU to +2 dBU
• Analog Audio Output SNR: >85 dB, 20 Hz to 20 kHz Vin=+2 dBU
• Analog to Digital Reference Level: +3.4 dBu = 0 dBfs
• Audio Synchronization:
  • Video Formats @ 60Hz frame rate: In scaling mode, Audio lags video by 18ms typ. In bypass mode, Audio lags video by 0ms
  • Video Formats @ 30Hz frame rate: In scaling mode, Audio lags video by 24ms typ. In bypass mode, Audio lags video by 14ms
• Output Connector: 3.5mm Mini-Stereo Jack