AMX NMX-DEC-N3322D - 4K60 H.26x/Dante AV-H Decoder with RJ45 Input and HDMI Output in Black Finish

The AMX NMX-DEC-N3322D is a high-performance 4K60 decoder designed for seamless decoding of both H.26x and Dante AV-H video streams. It is ideal for professional AV installations that require high-quality, low-latency video decoding for applications such as digital signage, video walls, conference rooms, and more. Capable of decoding 4K60 H.26x video from AMX N3300 series encoders, as well as Dante AV-H video streams from Dante-enabled devices like cameras, digital signage players, or software, the NMX-DEC-N3322D delivers excellent video quality with sub-2ms latency. The decoder also supports HDCP content from N3300 encoders, making it suitable for environments where content protection is a requirement.

Supporting Dante AV-H, the NMX-DEC-N3322D integrates seamlessly with Dante-enabled devices and can be easily managed with Dante Studio, Dante Controller, and Dante Domain Manager. This integration ensures the smooth routing, configuration, and management of both audio and video signals over the network. Whether you're using Dante Studio for video monitoring in production environments or configuring devices with Dante Controller, the NMX-DEC-N3322D ensures a fully interoperable solution for modern AVoIP networks.

For users needing flexibility, the NMX-DEC-N3322D offers HDMI 2.0 output with HDCP 2.2 support, ensuring compatibility with modern displays and devices. The decoder also features an RJ45 Ethernet input for network video, enabling video distribution over Ethernet with minimal setup. With support for a wide range of video resolutions, including 4K60 4:4:4, 1080p, and 720p, it offers scalable output that adjusts to the needs of different displays and setups. The built-in scaling functionality allows users to adjust the output resolution, providing a perfect fit for any display resolution, with one frame of latency introduced when scaling is used.

Enhanced security features are also built into the NMX-DEC-N3322D, including multicast, VLAN tagging, and Quality of Service (QoS) support, ensuring that video streams are securely distributed and prioritized within the network. The device is also PoE+ powered, making installation simpler and more efficient, while its low-power mode helps reduce energy consumption, making it an environmentally friendly choice for large-scale AV systems. The decoder is also certified for plenum space use (UL2043), ensuring its suitability for a wide variety of installation environments.

With its sleek black finish, compact design, and robust feature set, the AMX NMX-DEC-N3322D is an ideal solution for businesses and institutions looking to integrate high-quality video decoding into their AV systems, while leveraging Dante AV-H technology for enhanced networking and management capabilities.

Features

• High-quality 4K60 H.26x decoding with sub-2ms latency
• Supports Dante AV-H for interoperability with Dante-enabled devices
• HDMI 2.0 output with HDCP 2.2 content protection support
• RJ45 Ethernet input for network video over Ethernet
• Supports resolutions up to 4096x2160 (4K60 4:4:4) for superior video quality
• Output scaling for flexible display compatibility, with one frame of latency (17ms at 60fps)
• Enhanced security features with multicast, VLAN tagging, and QoS support
• PoE+ powered with low-power mode for energy savings
• Compatible with Dante Studio for PC-based video monitoring
• Plenum space certified (UL2043) for flexible installation in various environments
• Compliant with FCC, CE, and UL standards

Specifications

Video

• Digital Video Input: Network video over Ethernet via RJ45 port
• Digital Video Output: HDMI 2.0
• Formats: HDMI 2.0, HDCP 2.2 content protection support
• Progressive Input Resolutions: Supports most common HD resolutions up to 4K60 4:4:4
• Output Resolutions: 720p, 1080p, 4K60, or input resolution if scaler is disabled
• Output Scaling: Scaling adds one frame of latency (17ms at 60fps)
• Color Space: 4:4:4, YUV
• LocalPlay/HostPlay: 8 playlists
• Network Video Recording: H26x stream is compatible so long as the source is not HDCP

H264/H265 Video

• Stream Video Output: Up to 4K60 4:4:4
• Frame Rate: 50 or 60 Hz
• Profiles: H264: Baseline (BP), main (MP), high (HiP); H265: main (MP)
• Bitrate Range: 500 Kbps to 32 Mbps
• Rate Control: VBR, CBR
• Streaming Protocols: RTP, RTSP, RTMP, RTMP/S, SRTP, Dante AV-H

Audio

• Input Signal Types: Network audio over ethernet
• Output Signal Types: Embedded audio on HDMI or Analog Audio Output
• HDMI Audio Formats: 8ch PCM
• Analog Audio Format: Stereo 2-channel
• Audio Breakaway: Supported

Latency

• Latency: End to end video Latency: 110 ms

Communications

• Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP and Static IP
• HDMI: HDCP, EDID management

Ports

• +12V 2A: One 12 Volt DC power input
• P0 PoE+: 8-wire RJ45 port, 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port. Provides network connection, network AV video, and power to the Encoders and Decoders PoE+ power
• P1: 8-wire RJ45 port, 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port. Provides network connection, network AV video
• IR IN (front panel): 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically, 39 kHz). IR receiver is necessary (not included)
• IR OUT: 2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically, 39 kHz). Emitter is necessary (not included)
• RS232: 3-pin terminal Phoenix connector. Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
• AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced output. Dedicated audio input
• HDMI OUT: HDMI video output (passive pass-through from HDMI IN only)

Controls and Indicators - Front Panel

• Reset Button: Recessed pushbutton. Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
• ID Button: Recessed pushbutton. Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command). Holding the button for 30 seconds and releasing will cause the device to return to factory configuration
• Power LED: On solid (green) when operating power is supplied (via PoE or local power supply)
• Status LED: On flashing (green) when there is software activity
• Stream LED: On (green) when the unit is streaming video

Power Supply

• Power Supply, External, Optional: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional NMX-ACC-N9312 (FGN9312)
• Power over Ethernet (PoE), External, Optional: Can be powered via a PoE+ switch or other equipment with a PoE+ source. Conforms to IEEE 802.3at Class 4 (802.3at Type 2)
• Note: For the unit to receive Power over Ethernet (PoE+), it must be connected to a switch or other equipment that has a PoE+ PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE+ PSE port outside of the building where the PSE resides. It is for intra-building use only

Environmental

• Temperature: 32° to 104°F
• Humidity: 10% to 90% RH (non-condensing)
• Heat Dissipation: 85 BTU/hr

General

• Product Dimensions (LWH): 78.74 x 50 x 10.47 inches
• Product Weight: 1.45 lbs
• Shipping Weight: 2.80 lbs
• Regulatory Compliance: FCC, CE, and UL (Including 2043)