AMX PS-POE-AF-TC - 802.3AF Compliant PoE Injector in Black Finish

The AMX PS-POE-AF-TC is a Power over Ethernet (PoE) injector that simplifies the deployment of PoE-powered devices by delivering both power and data through a single category cable. This injector is fully IEEE 802.3af compliant, providing a reliable and efficient power solution for a wide range of networked devices, including AMX touch panels, receivers, and transmitters. It eliminates the need for separate power cables, reducing clutter and streamlining installations in both commercial and residential environments.

With support for 10/100/1000 Mbps data rates, the PS-POE-AF-TC is capable of providing high-speed data transmission while simultaneously powering devices up to 30 watts. This ensures that the connected devices receive both the necessary power and network connectivity, making it ideal for use with devices such as the DXLink multi-format transmitter and receiver modules, as well as Modero ViewPoint touch panels. The injector is equipped with dual shielded RJ45 jacks, supporting both EIA 568A and 568B wiring standards, allowing for flexible network configurations and compatibility with existing installations.

The PS-POE-AF-TC comes with a regulated output of 55 VDC and delivers up to 30 watts of guaranteed power, making it suitable for powering PoE-enabled devices without the need for additional power supplies. Its compact form factor ensures easy integration into any setup, and the molded black matte plastic enclosure provides durability and a sleek appearance. The power injector also features multiple safety certifications, including compliance with IEEE 802.3at (PoE), RoHS/WEEE, CE, and UL/cUL standards, ensuring that it meets the highest quality and safety standards.

Operating in a wide range of temperatures, the PS-POE-AF-TC can function in environments as cold as -4°F and as hot as 131°F, depending on the power load, making it versatile enough for both indoor and outdoor installations. Its thermal rating of 20 BTU/hr at 240VAC ensures effective heat dissipation, and the device is rated to function effectively at altitudes up to 10,000 feet.

For ease of use, the PS-POE-AF-TC features LED indicators to show the status of the device. The yellow LED indicates when power is on and active, while the green LED shows when a remote terminal is connected. If the green LED blinks, this signals an overload state or short circuit, allowing for easy troubleshooting.

Features

• Delivers 30 watts of guaranteed power over Ethernet to PoE-powered devices
• Supports 10/100/1000 Mbps data rates for high-speed network connectivity
• Compliant with IEEE 802.3af and IEEE 802.3at PoE standards
• Output voltage of 55 VDC with a maximum output current of 0.6A
• Includes dual shielded RJ45 jacks supporting EIA 568A and 568B wiring standards
• Features LED indicators to show power status and connectivity
• Compact and durable molded black matte plastic enclosure
• Regulated output with over-voltage, over-current, short-circuit, and transient protection
• Operating temperature range: -4°F to 104°F (-20°C to 40°C) at 30W, -4°F to 131°F (-20°C to 55°C) at 22.5W
• Thermal rating of 20 BTU/hr at 240VAC, suitable for high-performance environments
• Certifications: UL/cUL, IEEE 802.3at (PoE), CE, RoHS/WEEE, FCC Part 15, and more

Specifications

Environmental

• Temperature (Operating): -4°F to 104°F (-20°C to 40°C) at 30W, -4°F to 131°F (-20°C to 55°C) at 22.5W
• Temperature (Storage): -4°F to 158°F (-20°C to +70°C)
• Relative Humidity (Operating): Maximum 90%, Non-Condensing
• Thermal Rating: 20 BTU/hr (@240VAC)
• Operating Altitude: -1000 to 10,000 ft (-304.8 to 3048 m)

General

• LEDs:
  • Yellow (On): Power is on and active
  • Green (On): A remote terminal is connected
  • Green (Blinking): Overload state or short circuit
• Enclosure: Molded black matte plastic
• Cord and Connectors: Dual shielded RJ45 jacks built into the enclosure, EIA 568A and 568B
• Approvals: IEEE 802.3at (PoE), RoHS / WEEE compliant, CE, FCC Part 15, Class B, EN 55022 Class B (Emissions), EN 55024 (Immunity), VCCI (Japan), C-Tick, UL/cUL per IEC 60950-1, GS Mark per IEC 60950-1
• Dimensions: 5.5 x 2.12 x 1.25 inches
• Weight: .44 lbs

Input

• Pass Through Data Rates: 10/100/1000 Mbps
• Output Voltage: 55 VDC Nominal
• Output Power: 30 Watts (Guaranteed)
• Output Current: 0.6A (max)
• Transient Response: Meets IEC61000-4-4 (1kV)
• DXLink Transport Layer Throughput: 10.2 Gbps pass thru (only applicable to DXLink signals)

Compatible AMX Products

• DX-TX, DXLink Multi-Format Transmitter Module (FG1010-310)
• DX-TX-DWP, DXLink Multi-Format Decor Style Wallplate Transmitters (US) (FG1010-325-BL/-WH)
• DX-RX-WP, DXLink Multi-Format Wallplate Transmitters (FG1010-320-BL/WH)
• DX-RX, DXLink HDMI Receiver Module (FG1010-500)
• MVP-9000i, 9" Modero ViewPoint Touch Panel with Intercom (FG5967-01/02)