ART Pro Audio ProMIX - 3-Channel XLR Microphone Mono Mixer

Problem: You need to add 3 mics to a mixer, which only has one available channel.

Solution: Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.

Features

• 3 low-impedance XLR mic channels
• 3 level controls
• 3 phantom power on/off DIP switches
• 3 low - frequency cut on/off DIP switches
• A low-impedance balanced XLR line output
• Stereo 1/4" Phones/Aux. output
• Clip LED (fires 3dB below the onset of clipping)
• On/off Power switch, with LED
• Power: 12V DC (Adapter included)
• Output Phantom Power: 12V DC

Specifications

• Maximum Gain: +60dB
• Input Impedance: 600 Ω
• Maximum Input Level: -14dB
• Maximum Output Level: +14dB
• Output Impedance: 600 Ω
• Total Harmonic Distortion: 0.0002
• Low Cut: -3dB @ 100Hz
• Clip Headroom: 3dB
• Output Phantom Power: 12V DC
• Power: 12V DC (adapter) / 2x 9V (batteries)
• Dimensions: 5.625x3.75x1.75 inches (143mm x 92mm x 45mm)
• Weight: 1.5lb (680g)