Yorkville E10P - 350W 10-inch Powered 2-Way Loudspeaker in Black Finish

Built for maximum versatility, the E10P input section will easily handle microphone or line level inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the E10P can adapt easily to any audio application including use as a front-of-house PA loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and playback system (no additional mixer required).

A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and linear high-frequency response powers the 1-inch horn. An on-board active DSP based crossover ensures that the woofer and horn operate optimally while protecting the high quality speaker components.

The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium magnet, a silky-smooth 1-inch horn and driver and an enclosure built from voidless 15mm multi-ply Baltic birch for light weight with classic Elite ruggedness. That durability is engineered into the multi-angle enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or horizontally as a stage monitor. For added convenience, the E10P easily converts between 120VAC, 230VAC or 240VAC.

Features

• Integrated 650 Watt Amplifier (Peak - 325 Watts Program)
• 10-inch Woofer / 1-inch Compression Driver
• Max SPL 129dB Peak (123dB Continuous)
• Bi-Amplified Power Module
• Designed for Front-of-House or Monitor Applications
• 100° x 25° Horn with Peak and Average Horn Protection
• Two Band EQ with LF Roll-Off and Live/Playback Mode Switches
• Combi-Jack XLR and 1/4-inch Input
• Integrated All Metal Speaker Standmount Adaptor
• Solid 5/8-inch (15mm) Birch Plywood Construction
• Made in Canada

Specifications

• System Type: Powered Loudspeaker
• Active or Passive: Active
• Power Rating (Watts): 325 Watts (650 Watts Peak)
• Max SPL (dB): 129dB Peak (123dB Continuous)
• Frequency Response (Hz +/- 3dB): 65 - 20k
• Crossover Frequency (Hz): 1500
• Driver Configuration: 10-inch / 1-inch
• HF Dispersion (°H x °V): 100 x 25
• HF Protection: Peak and Average Limiting
• LF Protection: Excursion, RMS
• Cooling Scheme: Convection
• Power Cable: Removable IEC
• Power Switch: Yes
• Power Consumption (typ/max): 120VA / 200VA
• Inputs: 1 Combijack (XLR / 1/4-inch)
• Input Impedance (Bal/UnBal): 4k ohms / 2k ohms
• Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.35 at max
• Level Controls: Gain
• EQ Controls: Bass, Treble
• Limiter: Peak and Average limiting on horn and woofer
• LED Indicators: Power, Clip
• Corners: Metal
• Feet: Plastic Glides
• Bar Handles: One Side
• Flying Hardware: 5 (2 Top, 2 Bottom, 1 Pullback), 1/4" Threading
• Pole Mount Adapter (1 3/8"-3.5cm): Yes
• Enclosure Materials: 15mm (5/8-inch) 11-ply Russian Birch
• Port(s): Rear
• Grille: Perforated Metal
• Covering / Finish: Black Ozite (Carpet)
• Dimensions (DWH xbackW, inches): 12 x 13 x 18.5 x 5.5
• Dimensions (DWH xbackW, cm): 30 x 33 x 45 x 14
• Weight (lbs/kg): 34 / 15.5