Crown XTi 6002 - 2100W 2-Channel at 4-Ohm Power Amplifier

The Crown XTi 6002 is a powerhouse in professional amplification, delivering 2100W of clean, undistorted power per channel at 4 ohms. Part of the renowned XTi 2 Series, this amplifier is designed to meet the high demands of touring sound professionals, DJs, and live sound engineers who require reliability, performance, and advanced features. Whether you're powering large PA systems, subwoofers, or full-range speakers, the XTi 6002 ensures that your sound is delivered with precision and clarity. With its innovative features, rugged construction, and ease of use, the XTi 6002 sets the standard for performance in the world of professional audio amplification.

One of the standout features of the XTi 6002 is the Peakx Plus limiters, which provide ultimate system performance and protection. These limiters allow full control over threshold, attack, and release settings, ensuring that your speakers are always protected while delivering maximum output. This advanced limiter technology allows users to push their systems to the limit without worrying about distortion or damage, making the XTi 6002 ideal for live performances, concerts, and high-demand audio applications. The amplifier's robust output power of 2100W per channel at 4 ohms and up to 3000W per channel at 2 ohms ensures that it can handle even the most power-hungry speakers with ease, providing plenty of headroom for clean, undistorted sound.

The enhanced subharmonic synthesizer on the XTi 6002 offers precise control over low-end frequencies, making it perfect for applications where tight, powerful bass is essential. With user control over frequency, gain, and filter type, this feature allows you to fine-tune the amplifier to match the specific needs of your sound system and venue, whether you're running a full-range PA system or dedicated subwoofers. This advanced tuning capability makes the XTi 6002 an excellent choice for venues that require deep, impactful bass, such as clubs, theaters, and concert halls.

Another key feature of the XTi 6002 is its advanced system monitoring capabilities, accessible through Crown's HiQnet System Architect control software. This feature provides real-time visibility into critical system parameters such as AC line voltage and power supply temperature, helping to prevent issues before they become problems. This allows sound engineers to monitor the amplifier's performance and ensure that it is running optimally, even in challenging environments. The software also allows for the creation and management of up to 50 presets, 49 of which are user-definable, making it easy to recall specific settings for different venues and setups.

The amplifier is designed for rugged, professional use, with integrated cast-aluminum handles that make it easy to transport and install. The durable construction ensures that the XTi 6002 can withstand the rigors of touring and frequent setup and teardown, while the locking power cord clip provides a secure connection between the amplifier and the power source, preventing accidental disconnects during performances. Weighing just 24 lbs and housed in a compact 2U chassis, the XTi 6002 is a lightweight, portable solution for any professional audio system.

The XTi 6002 also includes three user-defined fan modes (normal, early, and full-speed) that allow you to match the fan performance to the specific application. This ensures that the amplifier remains cool and operates efficiently, even during extended use at high output levels. The efficient forced-air cooling system prevents excessive thermal buildup, making the XTi 6002 suitable for use in both permanent installations and mobile setups where cooling may be a concern.

In terms of audio quality, the XTi 6002 excels with a signal-to-noise ratio of 100 dB, ensuring clean and noise-free performance even in high-output scenarios. Its frequency response of +0 dB, -1 dB ensures accurate sound reproduction across the full range, while the damping factor of greater than 500 provides tight control over speaker drivers, particularly in the low-frequency range. This results in precise, punchy bass and clear, detailed highs, making the XTi 6002 an excellent choice for any high-performance sound system.

Connectivity is another strong point of the XTi 6002, with balanced XLR inputs and SpeakON outputs providing compatibility with a wide range of professional audio equipment. The amplifier's versatility is further enhanced by its support for both stereo, parallel, and bridged mono modes, allowing you to configure it to suit the specific needs of your audio setup. In bridged mono mode, the XTi 6002 delivers an impressive 6000W at 4 ohms, providing enough power for the most demanding audio applications.

With its combination of power, performance, and advanced features, the Crown XTi 6002 is an ideal solution for professionals who need a reliable, high-output amplifier for live sound, touring, or fixed installations. Its advanced DSP capabilities, powerful output, and robust construction make it a go-to choice for venues, sound engineers, and audio professionals who demand the best from their equipment.

Features

• 2100W per channel at 4 ohms, 3000W per channel at 2 ohms, 6000W bridged at 4 ohms
• Peakx Plus Limiters provide full control over threshold, attack, and release for maximum performance and protection
• Enhanced subharmonic synthesizer for precise control over low-end frequencies, ideal for bass-heavy applications
• Three user-selectable fan modes (normal, early, and full-speed) for optimal cooling performance in different environments
• HiQnet System Architect software for real-time system monitoring of AC line voltage and power supply temperature
• 50 presets available, 49 of which are user-definable, for quick and easy setup of various sound configurations
• Integrated cast-aluminum handles for easy transport and enhanced durability
• Locking power cord clip ensures secure power connection during operation or transport
• Signal-to-noise ratio of 100 dB for clean, noise-free audio
• Damping factor greater than 500 for precise control over speaker drivers, ensuring accurate sound reproduction
• Total Harmonic Distortion (THD) of less than 0.5% for clear, undistorted sound at high volumes
• Compact size (19 x 16.2 x 3.5 inches) ideal for portable setups and rack installations
• Versatile connectivity with XLR, SpeakON, and binding post options for compatibility with various audio systems
• Comprehensive protection features, including safeguards against shorts, no-load operation, and radio-frequency interference (RFI)

Specifications

• Output Power: 3000W (2 Ohm Dual), 2100W (4 Ohm Dual), 1200W (8 Ohm Dual), 6000W (4 Ohm Bridged), 4200W (8 Ohm Bridged)
• Sensitivity: 1.4V
• Rated Power Output: 1800W (Stereo)
• Signal to Noise Ratio: 100 dB
• Total Harmonic Distortion: <0.5%
• Damping Factor: >500
• Frequency Response: +0 dB, -1 dB
• Crosstalk: >70 dB
• Input Impedance: 20kOhm balanced, 10kOhm unbalanced
• Weight: 24 lbs
• Dimensions: 19 x 16.2 x 3.5 inches