EAW MK2396i - 600W 12-inch Passive 2-Way Portable Loudspeaker with 90 x 60-Degree Coverage in Black Finish

The EAW MK2396i BLACK is a 600W 12-inch passive 2-way portable loudspeaker engineered for exceptional performance in both small and large-scale venues. Whether used as a main PA system for small houses of worship, auditoriums, corporate A/V applications, hotel ballrooms, or meeting rooms, or as a distributed fill speaker in larger venues like stadiums, nightclubs, and themed entertainment complexes, the MK2396i BLACK delivers superior sound quality. Its black finish and rugged build make it ideal for both permanent and portable installations, while its high output capabilities ensure clear and powerful sound even in challenging environments.

At the core of the MK2396i BLACK is a high-performance 12-inch low-frequency (LF) driver with a 3-inch voice coil, delivering deep, punchy bass. Complementing the LF driver is a 1.4-inch exit, 3-inch voice coil compression driver for the high frequencies, mounted on a large horn that provides a nominal beamwidth of 90° x 60°. This ensures even coverage and precise sound dispersion across the entire listening area, making it suitable for a wide range of applications, from intimate auditoriums to large event spaces. The horn is designed to maintain consistent directivity across the high-frequency passband, providing smooth, clear sound without unwanted reflections.

The MK2396i BLACK utilizes advanced signal processing features, including EAW's beamwidth-matching crossover and filter design. This ensures a seamless integration between the LF and HF drivers, providing a uniform power response across the entire frequency range, eliminating the typical phase and frequency discontinuities that plague other loudspeakers. The loudspeaker can operate in either single-amp mode, where both LF and HF are powered from a single amplifier, or in bi-amp mode with an external processor, providing additional flexibility for complex setups that require independent control of the LF and HF drivers.

With an operating range of 65 Hz to 20 kHz, the MK2396i BLACK provides full-range audio reproduction, delivering both deep bass and crisp highs with exceptional clarity. Its axial sensitivity of 94 dB (LF/HF), 97 dB (LF), and 104 dB (HF) ensures clear, intelligible sound at high output levels. The MK2396i BLACK can reach a maximum SPL of 138 dB, with calculated axial output limits of 122 dB (average) and 128 dB (peak) for the LF/HF section, and 125 dB (average) and 131 dB (peak) for the LF section. This allows the MK2396i BLACK to deliver consistent, high-quality sound in even the most demanding environments.

Constructed from exterior-grade Baltic birch plywood, the MK2396i BLACK is both durable and acoustically efficient, minimizing resonance and ensuring clear, distortion-free sound. Its wear-resistant textured black paint finish provides additional protection and aesthetic appeal, while the powder-coated perforated steel grille protects the internal components while allowing maximum sound transparency. With dimensions of 30 x 15.54 x 14.75 inches and a weight of 60 lbs, the MK2396i BLACK is portable enough for mobile applications, yet sturdy enough for permanent installation. The speaker also offers various mounting options, including wall and pole mounting, as well as suspension in arrays, making it a versatile solution for a wide range of installations.

Features

• 600W passive 2-way loudspeaker ideal for smaller and larger venues, including houses of worship, auditoriums, and stadiums
• 12-inch LF driver with a 3-inch voice coil for deep bass, and 1.4-inch exit, 3-inch voice coil HF compression driver for clear high frequencies
• 90° x 60° beamwidth horn design for even coverage across the listening area
• Operating range of 65 Hz to 20 kHz, ensuring full-range sound reproduction
• Maximum SPL of 138 dB with calculated axial output limits of 122 dB (average) and 128 dB (peak) for LF/HF
• Axial sensitivity of 94 dB (LF/HF), 97 dB (LF), and 104 dB (HF) for clear sound at high output levels
• Beamwidth-matching crossover and filter design for seamless integration between LF and HF drivers
• Single-amp and bi-amp operating modes for flexible system configuration
• High-pass filter with a 60 Hz cutoff and DSP with 2-way filters for optimal sound performance
• Exterior-grade Baltic birch plywood construction with a wear-resistant textured black finish for durability
• Powder-coated perforated steel grille for maximum sound transparency and protection
• Dimensions: 30 x 15.54 x 14.75 inches, Weight: 60 lbs
• Shipping weight: 66 lbs

Specifications

Configuration

• Subsystem:
  • LF: 1 x 12 inch cone, vented
  • HF: 1 x 1.4 inch exit, 3 inch voice coil compression driver, horn-loaded
• Operating Mode:
  • Single-amp: LF/HF
  • Bi-amp: LF, HF
• External Signal Processing: High pass filter, DSP w/2-way filters

Performance

• Operating Range: 65 Hz to 20 kHz
• Nominal Beamwidth: 90 x 60 Degree
• Axial Sensitivity (whole space SPL):
  • LF/HF: 94 dB (65 Hz to 20 kHz)
  • LF: 97 dB (65 Hz to 1400 Hz)
  • HF: 104 dB (1200 Hz to 20 kHz)
• Input Impedance:
  • LF/HF 8 Ohm (Nominal), 7.3 Ohm @ 180 Hz (Minimum)
  • LF 8 Ohm (Nominal), 6.9 Ohm @ 290 Hz (Minimum)
  • HF 8 Ohm (Nominal), 7.3 Ohm @ 6800 Hz (Minimum)
• High Pass Filter: High Pass =>60 Hz, 12 dB/octave Butterworth
• Accelerated Life Test:
  • LF/HF: 69.3V (600W @ 8 Ohm)
  • LF: 69.3V (600W @ 8 Ohm)
  • HF: 34.6V (150W @ 8 Ohm)
• Calculated Axial Output Limit:
  • LF/HF: 122 dB (Average), 128 dB (Peak)
  • LF: 125 dB (Average), 131 dB (Peak)
  • HF: 126 dB (Average), 132 dB (Peak)
• Max SPL: 138 dB

Physical

• Material: Exterior-grade Baltic birch plywood
• Finish: Wear resistant textured black paint
• Grille: Powder-coated perforated steel
• Dimensions (HWD): 30 x 15.54 x 14.75 inches
• Weight: 60 lbs