EAW SB210-WP - 500W 2 x 10-inch Passive IP56-Rated Installation Subwoofer with 2.5-inch Voice Coil in Black Finish

The EAW SB210-WP Black is a high-performance, 500W passive subwoofer designed to deliver powerful low-frequency support in applications where space is limited. As part of EAW's renowned SB Series, the SB210-WP Black combines the impressive output of dual 10-inch drivers with a compact, low-profile design, making it ideal for permanent installation in venues where deep, impactful bass is needed without occupying excessive space. Whether used in restaurants, bars, hotels, performing arts venues, corporate events, or retail spaces, the SB210-WP Black provides reliable and high-quality bass reinforcement, delivering exceptional performance even in the most demanding environments.

The SB210-WP Black features two 10-inch drivers with 2.5-inch voice coils, optimized for high power handling and maximum output. These drivers are mounted in a direct radiating configuration that maximizes cone area and provides tight, clean bass. To further enhance the performance, the SB210-WP Black is equipped with a unique ultra-low turbulence port design. This port design ensures minimal distortion and maximizes the subwoofer's efficiency, allowing it to produce higher output levels despite its smaller size. This makes the SB210-WP Black an ideal choice for applications where space is a premium but powerful low-frequency performance is still required.

The SB210-WP Black offers a broad operating range of 35 Hz to 150 Hz, ensuring it can reproduce everything from deep sub-bass frequencies to more controlled, punchy mid-bass. The subwoofer's performance is impressive, with a maximum SPL of 128 dB (whole space) and 134 dB (half space) at a 12 dB crest factor, delivering powerful bass that fills large or acoustically challenging spaces. At a 6 dB crest factor, it maintains an average SPL of 122 dB (whole space) and 128 dB (half space), making it suitable for both smaller venues and larger installations. With an axial sensitivity of 89 dB (whole space) and 95 dB (half space), the SB210-WP Black provides consistent, reliable output, ensuring high-quality sound in various acoustical environments.

For optimal system integration, the SB210-WP Black is designed to work with advanced digital signal processing (DSP) systems. EAW recommends using their DynO processing for crossover and equalization, which ensures the subwoofer performs at its best across the full frequency range. Additionally, the subwoofer's recommended high-pass filter (HPF) is set at 35 Hz with a 12 dB/octave slope, providing protection to the driver while optimizing its performance.

The SB210-WP Black is built for durability and long-lasting performance. Its enclosure is constructed from Baltic birch plywood, providing strength and resonance control while ensuring the subwoofer's longevity. The wear-resistant black finish makes it visually appealing and able to withstand the rigors of permanent installations. The subwoofer also features 16 M10 suspension points for easy rigging, as well as an M20 threaded pole mount for secure pole mounting in various setups. With dimensions of 12 x 30 x 19.7 inches and a weight of 67 lbs, the SB210-WP Black is compact yet sturdy enough for a variety of applications. It comes with 2 x Neutrik NL4 connectors and a 2-pin barrier strip for flexible and reliable connectivity.

Features

• 500W passive dual 10-inch subwoofer designed for compact, high-output bass performance
• Direct radiating design with ultra-low turbulence port for enhanced output and minimal distortion
• Operating range of 35 Hz to 150 Hz for full-range low-frequency reproduction
• Maximum SPL of 134 dB (half space) and 128 dB (whole space) at 12 dB crest factor
• Axial sensitivity of 89 dB (whole space) and 95 dB (half space) for reliable, consistent performance
• 4-ohm nominal impedance with a minimum of 4.5 ohms at 45 Hz for compatibility with most amplifiers
• Recommended high-pass filter at 35 Hz with a 12 dB/octave Butterworth slope for optimal performance
• Ideal for permanent installations in A/V systems, performing arts venues, restaurants, bars, and more
• Constructed from durable Baltic birch plywood with a wear-resistant textured black finish
• 16 M10 suspension points and M20 threaded pole mount for flexible rigging and installation
• Dimensions: 12 x 30 x 19.7 inches; Weight: 67 lbs for easy integration into various spaces
• Includes 2 x Neutrik NL4 connectors and 2-pin barrier strip for flexible connectivity

Specifications

Performance

• Max SPL (12 dB Crest Factor):
  • Whole Space: 128 dB
  • Half Space: 134 dB
• Max SPL (6 dB Crest Factor):
  • Whole Space: 122 dB
  • Half Space: 128 dB
• Operating Range: 35 Hz - 150 Hz
• Axial Sensitivity:
  • Whole Space: 89 dB
  • 35 Hz - 120 Hz Half Space: 95 dB
• Input Impedance: 4 ohms nominal, 4.5 ohms @ 45 Hz minimum
• Recommended HPF: 35 Hz, 12 dB/oct
• Accelerated Life Test: 500 W @ 4 ohms

Configuration

• LF Transducer, Loading:
  • 2 x 10-inch cone, 2.5-inch VC
• Operating Modes: VLF, DSP with DynO

Physical

• Physical Rigging:
  • 16 x M10 suspension points
  • M20 Threaded pole mount
• Dimensions (HWD): 12 x 30 x 19.7 inches
• Net Weight: 67 lbs
• Shipping Weight: Approx. 72 lbs
• Mounting Accessories: 2 x Nuetrik NL4, 2-pin barrier strip