International Shipping Available

PRICING SUBJECT TO CHANGE WITHOUT NOTICE DUE TO POTENTIAL IMPORT COST FLUCTUATIONS

Furman PL-PLUS DMC - 15A Power Conditioner with Lights and Voltmeter/Ammeter

$499.95
The PL-PLUS DMC Power Conditioner from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design.
SKU
PL-PLUS DMC
UPC
654061027980

The PL-PLUS DMC features Smooth Track LED rack lights which produce virtually no heat and provide an extremely long lifespan. A dimmer control for the rack lights allows the user to adjust the level of illumination (by rotating clockwise/counterclockwise) or switch the lamps on and off (by pushing the knob in). A rear mounted BNC jack accepts any standard (12VAC 0.5 amp) gooseneck lamp for rear rack illumination.

The PL-PLUS DMC is equipped with a front panel convenience AC outlet and eight rear panel outlets in two isolated banks. The outlets in Bank A are spaced to accommodate transformer plugs (wall warts). Since the banks are isolated from each other, it is recommended to connect analog equipment into Bank A and digital equipment into Bank B (or vice versa). The PL-PLUS DMC's 15A (1800 watt) capacity is supplied from a robust 14 AWG, 10 foot AC cord.

Additionally, the PL-PLUS DMC offers a switchable laboratory precision digital meter that displays incoming voltage in 1-volt steps or true RMS current in 0.1 amp steps. The voltmeter's accuracy is ±1.5 volts and features a tri-color voltage range indicator. This informs the user whether voltage is in or out of a safe range, even from a distance too great to accurately read the displayed voltage.

Features

  • SMP (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown)
  • LiFT (Linear Filtering Technology) with zero ground contamination
  • Switchable/Dimmable true RMS current and laboratory precise digital voltage meter
  • Two Smooth Track retractable, long-life, low-heat, front panel LED lights with dimmer-power switch for rack illumination
  • BNC connector on the rear panel accepts any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of your rack (Furman GN-I and GN-LED accessory gooseneck lamps are best for this application)
  • Eight rear panel AC outlets, three with wide spacing to accommodate large AC transformer plugs (wall warts)
  • One front panel convenience outlet
  • 15A (1800 watt) capacity with 15A circuit breaker
  • Five year limited warranty

Specifications

General

  • Family: Classic Series
  • Line Voltage: 120 (Volts)
  • Number of Outlets: 9
  • Number of Isolated Banks: 2
  • Outlet Descriptions: All 9 outlets linearly filtered and surge protected
  • Rack Mountable: Yes
  • Rack Ears Included: Yes
  • Front Panel Meter(s): LED voltmeter/ammeter displays incoming voltage and true RMS current draw
  • Front Media Light(s): 2 multi-LED, dimmable lamps
  • ControlFront panel: On/Off switch, Voltage meter dimmer button
  • Voltage Regulation: No
  • Compliance: TUVus
  • USB Charging: N/A
  • Low Voltage Trigger: N/A
  • AC Power Cord: 10 ft, captive 3/14 AWG, with NEMA 15 plug
  • Dimensions: 19" W x 10.5" D x 1.75" H
  • Weight: 12 lbs
  • Power Consumption: 12 Watts

AC Protection

  • AC Protection Technology: Extreme Voltage Shutdown
  • Series Multi-Stage Protection
  • Non-sacrificial protection with zero ground contamination
  • Under-Voltage Shutoff: 90V
  • Over-Voltage Shutoff: 140 VAC
  • Maximum Current Rating: 15 (Amps)
  • Initial Clamping Level: 188 VAC peak @ 3,000 Amps

Filtration

  • Filtration Technology: LiFT
  • Filtration Rating: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
  • Signal Line Protection: No

Shipping Info

  • Length: 21.6 (Inches)
  • Width: 14.8 (Inches)
  • Height: 4.2 (Inches)
  • Weight: 13.35 (Lbs)
  • Unit of Measure: Each
  • UPC: 654061027980

Other Specifications

  • Response Time: 1 nanosecond
  • Maximum Surge Current: 6,500 amps
  • Construction: Steel chassis, .120″ brushed and black anodized aluminum front panel; glass epoxy printed circuit boards