Furman PL-PROC - 20A Power Conditioner with Lights and Voltmeter

The PL-PRO C features Smooth Track LED rack lights which produce virtually no heat and provide an extremely long lifespan. A dimmer control for the rack lights allows the user to adjust the level of illumination (by rotating clockwise/counterclockwise) or switch the lamps on and off (by pushing the knob in). A rear mounted BNC jack accepts any standard (12VAC 0.5 amp) gooseneck lamp for rear rack illumination.

The PL-PRO C is equipped with a front panel convenience AC outlet and eight rear panel outlets in two isolated banks. The outlets in Bank A are spaced to accommodate transformer plugs (wall warts) which may be secured with the included hook and loop straps. Since the banks are isolated from each other, it is recommended to connect analog equipment into Bank A and digital equipment into Bank B (or vice versa). The PL-PRO C's 20 amp (2400 watt) capacity is supplied from a robust 12 AWG, 10 foot AC cord.

Additionally, the PL-PRO C offers a tri-color multi-segment LED AC voltage meter that displays incoming voltage in 2-volt steps. The voltmeter's accuracy is ±2.0 volts. This informs the user whether the voltage is in or out of a safe range, even from a distance too great to accurately read the displayed voltage.

Features

• SMP (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown)
• LiFT (Linear Filtering Technology) with zero ground contamination
• 20-segment LED tri-color AC voltage meter (allows easy verification of voltage range from a distance or in poor lighting)
• Front panel mounted USB charger
• Two Smooth Track retractable, long-life, low-heat, front panel LED lights with dimmer-power switch for rack illumination
• BNC connector on the rear panel accepts any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of your rack (Furman GN-I and GN-LED accessory gooseneck lamps are best for this application)
• Eight rear panel AC outlets (three with wide spacing and hook and loop straps to accommodate and secure transformers - wall warts)
• One front panel convenience outlet
• 20 amp (2400 watt) capacity
• Five year limited warranty

Specifications

General

• Family: Classic Series
• Line Voltage: 120 (Volts)
• Number of Outlets: 9
• Number of Isolated Banks: 2
• Outlet Descriptions: All 9 outlets linearly filtered and surge protected
• Rack Mountable: Yes
• Rack Ears Included: Yes
• Front Panel Meter(s): Segmented LED voltmeter
• Front Media Light(s): 2 multi-LED, dimmable lamps
• ControlFront panel: On/Off switch
• Voltage Regulation: No
• Compliance: TUVus
• USB Charging: 1 front panel USB charger
• Low Voltage Trigger: N/A
• AC Power Cord: 10 ft, captive 3/14 AWG, with NEMA 20 plug
• Dimensions: 19" W x 10.5" D x 1.75" H
• Weight: 12 lbs
• Power Consumption: 12 Watts

AC Protection

• AC Protection Technology: Extreme Voltage Shutdown
• Series Multi-Stage Protection
• Non-sacrificial protection with zero ground contamination
• Under-Voltage Shutoff: 90V
• Over-Voltage Shutoff: 140 VAC
• Maximum Current Rating: 20 (Amps)
• Initial Clamping Level: 188 VAC peak @ 3,000 Amps

Filtration

• Filtration Technology: LiFT
• Filtration Rating: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
• Signal Line Protection: No

Shipping Info

• Length: 21.6 (Inches)
• Width: 15 (Inches)
• Height: 4.1 (Inches)
• Weight: 13.05 (Lbs)
• Unit of Measure: Each
• UPC: 654061027997

Other Specifications

• Response Time: 1 nanosecond
• Maximum Surge Current: 6,500 amps
• Construction: Steel chassis, .120″ brushed and black anodized aluminum front panel; glass epoxy printed circuit boards