JBL ASB6115 - 3200W 15-inch Passive Front Loaded Installation Subwoofer in Black Finish

The JBL Professional ASB6115 is a high-performance 3200W passive subwoofer designed to deliver deep, powerful bass with precision and clarity. Featuring JBL's 2265H-1 Differential Drive dual voice coil, dual gap 15-inch woofer, this subwoofer offers exceptional low-frequency output while maintaining low distortion. The 2265H-1 driver is built with a neodymium magnet and an ultra-robust cone, ensuring durability and long life, even under heavy use. The subwoofer's enclosure is constructed from 16 mm (5/8-inch) exterior-grade 11-ply birch plywood and coated in JBL's rugged DuraFlex finish, which adds both aesthetic appeal and resistance to harsh environmental conditions. Heavily braced to reduce unwanted vibrations, the enclosure maximizes low-frequency performance, ensuring that the ASB6115 can handle demanding audio applications with ease.

The ASB6115 is designed for versatile installation and use. The rectangular enclosure is fitted with 16 M10 threaded attachment points (four on the top, four on the bottom, and four on each side), allowing for flexible mounting options in both ground-stacked and suspended configurations. The subwoofer also features a powder-coated 14-gauge perforated steel grille, lined with acoustically transparent foam, providing both driver protection and a professional appearance. As part of JBL's AE Series, the ASB6115 is ideal for a wide variety of professional audio applications, whether used in stand-alone arrays or in combination with other AE Series products. The subwoofer's black DuraFlex finish ensures it blends seamlessly into most environments, with a white finish available upon request.

In terms of performance, the ASB6115 provides a frequency range from 32 Hz (-10 dB) to 1 kHz and a frequency response from 42 Hz to 1 kHz (±3 dB), making it ideal for use in professional sound reinforcement systems where deep, impactful bass is essential. The subwoofer is capable of handling up to 800 W of continuous pink noise (3200 W peak), with a long-term power rating of 675 W (2700 W peak) for 100 hours. This ensures that the ASB6115 delivers reliable, sustained output in demanding environments. With a maximum SPL of 126 dB (cont avg) and 132 dB (peak) from 35 Hz to 400 Hz, the ASB6115 produces powerful bass that can fill large venues with ease. The system sensitivity is 97 dB at 1W (2.83V) @ 1m, ensuring efficient performance and consistent output.

The ASB6115 features FIR tuning, which ensures that the phase profile is matched to full-range models, allowing for seamless integration into large-scale systems. The subwoofer operates with a nominal impedance of 8 ohms, offering compatibility with a wide range of amplifiers. The input connectors include both NL4 Neutrik Speakon and CE-compliant barrier strip terminals, which accept up to 10 AWG wire or 9 mm (0.375 in) spade lugs, and the Speakon terminals are in parallel with the barrier strip for loop-through connectivity. The ASB6115 is also IP>3-rated per IEC529, ensuring that it is resistant to dust and water, making it a reliable choice for outdoor events and installations in harsh environments.

Features

• 1 x 15-inch JBL 2265H-1 Differential Drive dual coil, dual gap neodymium woofer
• Large vent area for high output with low distortion
• Frequency range: 32 Hz - 1 kHz (-10 dB), frequency response: 42 Hz - 1 kHz (±3 dB)
• Maximum SPL: 126 dB cont avg (132 dB peak) from 35 Hz to 400 Hz
• System sensitivity: 97 dB at 1W (2.83V) @ 1m
• Nominal impedance: 8 ohms
• Transducer power rating: 800 W continuous (3200 W peak), 2 hours
• Long-term system power rating: 675 W (2700 W peak), 100 hours
• Durable enclosure made from 16 mm (5/8 inch) exterior-grade 11-ply birch plywood
• 16 M10 threaded suspension points for flexible mounting
• Finish: Black DuraFlex (white finish available upon request)
• Grille: Powder-coated 14-gauge perforated steel with acoustically transparent black foam backing
• Input connectors: NL4 Neutrik Speakon and CE-compliant barrier strip terminals (accepts up to 10 AWG wire)
• Environmental ratings: Mil-Std 810; IP>3 per IEC529 for dust and water resistance
• Dimensions: 19 x 16.5 x 23.5 inches
• Weight: 45.5 lbs
• Optional accessories: M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-3

Specifications

System

• Frequency Range (-10 dB): 32 Hz - 1 kHz
• Frequency Response (±3 dB): 42 Hz - 1 kHz
• Transducer Power Rating: 800 W (3200 W peak), 2 hrs
• Long-Term System Power Rating: 675 W (2700 W peak), 100 hrs
• Maximum SPL (1m): 35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak)
• System Sensitivity: 35 Hz - 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m
• Nominal Impedance: 8 ohms

Transducers

• Low Frequency Driver: 1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive driver

Physical

• Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
• Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
• Finish: Black DuraFlex finish. White available upon request
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
• Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through
• Environmental Specifications: Mil-Std 810; IP≥3 per IEC529
• Dimensions: 19 x 16.5 x 23.5 inches
• Net Weight: 45.5 lb
• Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-3