JBL ASB7118-WH - 2000W 18-inch Passive Front Loaded Installation Subwoofer in White Finish

The JBL Professional ASB7118-WH is a high-performance 2000W passive subwoofer designed for demanding professional audio applications, delivering deep, powerful bass with unmatched clarity and precision. This subwoofer features JBL's exclusive 2269H Ultra Long Excursion 18-inch Differential Drive woofer, equipped with a neodymium magnet, dual voice coils, and dual gaps. This innovative design, combined with JBL's Vented Gap Cooling (VGC) technology, allows the woofer to handle extremely high excursion levels, with a peak-to-peak excursion of 89 mm (3.5 inches), providing exceptional low-frequency output with minimal distortion. The ASB7118-WH is part of JBL's AE Series, making it suitable for a wide variety of applications, including auditoriums, theaters, concert venues, live performance spaces, and more.

The ASB7118-WH subwoofer is housed in a robust, front-loaded vented enclosure, built from 16 mm (5/8-inch) exterior-grade 11-ply birch plywood. The rectangular cabinet is designed to minimize the frontal profile while extending the low-frequency bandwidth. The enclosure is coated in JBL's rugged white DuraFlex finish, providing a durable, protective layer that ensures the subwoofer withstands the rigors of professional environments. The subwoofer's design is optimized for both strength and acoustic efficiency, with extensive bracing to enhance performance and reduce unwanted resonances. The powder-coated 14-gauge steel grille, lined with acoustically transparent foam, protects the drivers while maintaining a professional and clean aesthetic. The subwoofer is also equipped with 16 M10 threaded suspension points (four on the top, four on the bottom, and four on each side), allowing for easy mounting in a variety of configurations, whether ground-stacked or suspended. Pre-engineered array bracketry is available for use with other AE Series products in custom arrays.

When it comes to performance, the ASB7118-WH excels in delivering deep, precise bass with a frequency range of 22 Hz to 1 kHz (-10 dB) and a frequency response of 34 Hz to 1 kHz (±3 dB). With a continuous power rating of 2000W (8000W peak) for 2 hours, and a long-term system power rating of 1200W (4800W peak) over 100 hours, the ASB7118-WH is capable of handling high-output demands without compromising sound quality. The subwoofer can achieve a maximum SPL of 129 dB (cont avg) and 135 dB (peak) from 25 Hz to 200 Hz, providing ample volume for even the largest venues. The system sensitivity of 96 dB at 1W (2.83V) @ 1m ensures optimal efficiency and performance with minimal power consumption. The subwoofer is ideal for a range of audio systems, delivering clean, powerful bass for both live sound and permanent installations.

The ASB7118-WH is designed with flexibility in mind, featuring a Parallel/Discrete switchable input mode that allows it to be configured for different system setups. The subwoofer is tuned using JBL's FIR (Finite Impulse Response) technology, ensuring that its phase profile matches seamlessly with other full-range models in the AE Series, creating a cohesive sound across the entire system. With a nominal impedance of 8 ohms and input connectors that include both NL4 Neutrik Speakon and CE-compliant barrier strip terminals (accepting up to 10 AWG wire or 9 mm [0.375-inch] spade lugs), the ASB7118-WH offers excellent versatility and compatibility with a wide range of amplifiers. The Speakon connectors are wired in parallel with the barrier strip, allowing for convenient loop-through connections in multi-unit setups. The ASB7118-WH meets Mil-Std 810 standards for durability and is rated IP-x3 for water resistance, ensuring reliable performance even in challenging environments.

Features

• 1 x 18-inch JBL 2269H Ultra Long Excursion Differential Drive low-frequency driver with 100 mm (4-inch) voice coil
• Peak-to-peak excursion of 89 mm (3.5 inches) for high excursion and minimal distortion
• Large vent area for high output with low distortion
• Frequency range: 22 Hz - 1 kHz (-10 dB), frequency response: 34 Hz - 1 kHz (±3 dB)
• Maximum SPL: 129 dB cont avg (135 dB peak) from 25 Hz to 200 Hz
• System sensitivity: 96 dB at 1W (2.83V) @ 1m
• Nominal impedance: 8 ohms
• Transducer power rating: 2000 W continuous (8000 W peak), 2 hours
• Long-term system power rating: 1200 W (4800 W peak), 100 hours
• Durable enclosure made from 16 mm (5/8-inch) exterior-grade 11-ply birch plywood
• 16 M10 threaded suspension points for flexible mounting
• Finish: White DuraFlex (black finish available upon request)
• Grille: Powder-coated 14-gauge perforated steel with acoustically transparent black foam backing
• Input connectors: NL4 Neutrik Speakon and CE-compliant barrier strip terminals (accepts up to 10 AWG wire)
• Environmental ratings: Mil-Std 810; IP-x3-rated for water resistance
• Dimensions: 21.5 x 22 x 32.1 inches
• Weight: 94.5 lbs
• Optional accessories: M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-1

Specifications

System

• Frequency Range (-10 dB): 22 Hz - 1 kHz
• Frequency Response (±3 dB): 34 Hz - 1 kHz
• Transducer Power Rating (AES): 2000 W (8000 W peak), 2 hrs
• Long-Term System Power Rating (IEC): 1200 W (4800 W peak), 100 hrs
• Maximum SPL: 25 Hz - 200 Hz: 129 dB-SPL cont avg (135 dB peak)
• System Sensitivity (dB-SPL, 1W @ 1m): 25 Hz - 200 Hz: 96 dB-SPL, 1W (2.83V) @ 1m
• Nominal Impedance: 8 ohms

Transducers

• Low Frequency Driver: 1 x JBL 2269H, 460 mm (18 in) dia, 100 mm (4 in) Dual Coil Dual Gap neodymium Differential Drive VGC driver

Physical

• Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
• Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
• Finish: Black DuraFlex finish. White available upon request
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
• Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through
• Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
• Dimensions: 21.5 x 22 x 32.1 inches
• Weight: 94.5 lbs
• Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-1