JBL Control 19CS - 200W 8-inch Passive Ceiling Subwoofer with Backcan and 180-Degree Coverage in White Finish

The JBL Professional Control 19CS is a high-performance 8-inch passive ceiling subwoofer designed to enhance the low-frequency response in ceiling-mounted sound systems. This subwoofer is engineered to provide powerful bass output while maintaining a low-profile, compact design, making it ideal for augmenting the bass output of the Control Contractor loudspeakers in a variety of commercial and residential environments. The Control 19CS delivers deep, extended bass with minimal distortion, making it the perfect addition to any sound system requiring full-fidelity sound in ceiling-mounted installations.

One of the standout features of the Control 19CS is its innovative Nested Chamber design, which, combined with the Linear Dynamic Aperture port design, allows for high output from a compact enclosure. This design is specifically engineered to produce extended deep bass without the need for an external crossover or a separate amplifier channel. The subwoofer's natural acoustic low-pass character ensures a seamless integration with full-range systems, whether it is installed in parallel with full-range speakers for bass-overlap configurations, or used in conjunction with a high-pass filter on the full-range speakers to optimize performance.

The 200 mm (8-inch) driver features a polypropylene cone with a 38 mm (1.5-inch) coil on an aluminum former, ensuring durability and long excursion capability. The pole piece is vented to minimize distortion, and the butyl rubber surround provides excellent damping, ensuring a long lifespan and reliable performance even under high-power conditions. JBL's exclusive SonicGuard overload protection circuitry helps prevent damage from over-driving the subwoofer, providing enhanced system reliability without compromising sound quality.

Designed for easy installation, the Control 19CS is packaged with a grille, backcan, and tile rails, making it simple to install in standard ceiling spaces. The removable locking connector with screw-down terminals ensures secure wire connections, and the speaker's strain relief system accommodates both cable and flex conduit, further simplifying the installation process. The Control 19CS also comes with a cutout template and paint shield for a clean, professional finish. It is designed to fit into standard 2 x 2 ft or 2 x 4 ft ceiling tiles, offering flexibility in a wide range of ceiling configurations.

The Control 19CS offers a broad frequency range from 42 Hz to 200 Hz, providing powerful and clear low-end performance that complements full-range ceiling loudspeakers. With a nominal sensitivity of 95 dB SPL and a rated maximum SPL of 115 dB at 1 meter (3.3 feet), the Control 19CS is capable of delivering high output with minimal distortion. Its 180° conical coverage ensures even bass distribution throughout the listening area, providing an immersive listening experience for everyone in the room.

Features

• 200 mm (8.0-inch) polypropylene cone driver with butyl rubber surround for deep bass and low distortion
• Innovative Nested Chamber and Linear Dynamic Aperture port design for high output from a compact enclosure
• SonicGuard overload protection for enhanced reliability and protection against over-driving
• Frequency range from 42 Hz to 200 Hz, ideal for augmenting the low-frequency output of full-range speakers
• Nominal sensitivity of 95 dB SPL, ensuring high output with minimal distortion
• Rated maximum SPL of 115 dB at 1 meter (3.3 feet) for powerful performance in medium to high volume applications
• 180° conical coverage for consistent sound quality across the listening area
• 200W continuous program power handling with 100W continuous pink noise for reliable, high-fidelity bass reproduction
• Simple installation with a removable locking connector, screw-down terminals, and included tile rails, cutout template, and paint shield
• UL1480, UL2043, NFPA90, and NFPA70 certified, suitable for use in air handling spaces

Specifications

System

• Frequency Range (-10 dB): 42 Hz - 200 Hz
• Power Capacity: 200 Watts Continuous Program Power, 100 Watts Continuous Pink Noise
• Nominal Sensitivity: 95 dB SPL, 1W @ 1 m (3.3 ft) in ceiling near corner (pi/2), 89 dB SPL, 1W @ 1 m (3.3 ft) in center of ceiling (2)
• Nominal Coverage Angle: 180° conical coverage
• Rated Maximum SPL: 115 dB @ 1 m (3.3 ft) in ceiling near corner (pi/2)
• Nominal Impedance: 8 ohms

Transducer

• Low Frequency: 200 mm (8.0 in) Polypropylene cone, 38 mm (1.5 in) coil on aluminum former

Physical

• Enclosure: Backcan: Formed steel, Baffle/Rim: Medium impact polystyrene, fire rated UL94V-0
• Overload Protection: Full-range power limiting to protect network and transducers (Control 19CST only)
• Termination: Removable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals. Max wire size 12 AWG (2.5 mm2)
• Safety Agency Rating: Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 and NFPA70, S7232/UL listed, signaling speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849
• Outside Dimensions (H x Dia.): 345 x 345 mm (13.6 x 13.6 in), 318 mm (12.5 in) front of ceiling tile to back of backcan
• Cutout Size: 305 mm (12.0 in)
• Net Weight (each): 12 lb
• Shipping Weight (pair): 28 lbs
• Included Accessories: C-shaped support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles), cutout template, paint shield, removable locking wiring connector