JBL Control 52-WH - 50W 2.5-inch Passive 70V/100V Surface-Mount Loudspeaker with 150 x 150-Degree Coverage in White Finish

The JBL Professional Control 52-WH is a compact, high-performance satellite loudspeaker designed to deliver superb high-fidelity sound in a wide variety of installations. This speaker features a low-distortion 60 mm (2.5 in) driver, which is engineered for optimal sound reproduction. The driver incorporates a secondary bucking magnet for enhanced efficiency, a rubber half-roll surround for improved bass performance, and a 19 mm (0.75 in) copper-clad aluminum voice coil wound on a vented Nomex former for superior fidelity and long-term reliability. Additionally, the copper-capped pole piece helps to provide consistent impedance and an extended high-frequency response, ensuring a well-rounded and precise sound throughout the frequency range.

Designed to fit seamlessly into any environment, the Control 52-WH is both stylish and unobtrusive, making it an ideal choice for both professional and residential installations. It has a 150° x 150° omnidirectional coverage pattern, which ensures consistent sound distribution over a wide area. The speaker is perfect for use in a variety of applications, from background music in commercial spaces to more demanding high-fidelity sound setups. The wall-mount brackets included with the speaker allow for flexibility in installation, enabling the speaker to be angled up to 45° off-axis for optimal sound coverage.

The Control 52-WH is compatible with JBL's subwoofer systems, including the Control 50S/T pendant subwoofer, Control 60PS/T pendant, and Control 40CS/T in-ceiling subwoofer, making it a versatile addition to any audio system. The subwoofer-satellite system ensures full-range, wide-bandwidth performance, with the included crossover ensuring that the system can be driven either as low-impedance or via a 70V/100V distributed speaker line. The 16-ohm impedance allows easy integration with multiple speakers, making it suitable for both small and large installations.

With a compact design and available in a white finish, the Control 52-WH blends effortlessly into a wide range of environments, whether installed in commercial settings, public spaces, or even home audio systems. Its lightweight construction and small form factor make it easy to install, while its exceptional performance ensures that it will meet the demands of any audio installation.

Features

• 50W continuous program power, with 25W continuous pink noise (2 hrs) and 30W continuous program power (100 hrs)
• Low-distortion 60 mm (2.5 in) driver with polypropylene cone, butyl rubber surround, and copper-clad aluminum voice coil for high-fidelity sound
• Secondary bucking magnet and copper-sleeved pole piece for extended high-frequency response
• Nominal impedance of 16 ohms allows for easy integration with low-impedance or 70V/100V distributed speaker lines
• 150° x 150° omnidirectional coverage for wide, even sound distribution across large areas
• Wall-mount brackets included with the ability to angle the speaker up to 45° off-axis for precise sound placement
• Compact dimensions (4.5 x 3.3 x 3.75 inches) with a net weight of 1.5 lbs
• Included accessories: wall bracket, 2-pin locking connector, and mounting hardware for easy installation
• Available in white to suit a variety of installation environments

Specifications

System

• Frequency Range (-10 dB): 140 Hz - 20 kHz
• Frequency Response (±3 dB): 180 Hz - 17 kHz
• Power Capacity: 50 Watts Continuous Program Power (2 hrs), 25 Watts Continuous Pink Noise (2 hrs), 30 Watts Continuous Program Power (100 hrs), 15 Watts Continuous Pink Noise (100 hrs)
• Nominal Sensitivity: 85 dB (4.0V/1m = 1W), 82 dB (2.83V, 1m)
• Nominal Coverage Angle: 150° x 150° (omnidirectional)
• Rated Maximum SPL (1m): 94 dB average, 100 dB peak
• Nominal Impedance: 16 ohms

Transducer

• Driver: 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension

Enclosure

• Input Connector: Removable locking 2-pin connector with screw-down terminals; Max wire 12 AWG (2.5 mm2)
• Material: High impact polystyrene, painted zinc-plated metal grille
• Dimensions (H x W x D): Cabinet: 4.5 x 3.3 x 3.75 in; Wall bracket: 2.0 in
• Net Weight: 1.5 lbs
• Shipping Weight: 1.8 lbs
• Included Accessories: Wall bracket (both speaker and wall parts), 2-pin locking connector