JBL SRX835 - 800W 15-inch Passive 3-Way Portable Loudspeaker with 60 x 40-Degree Coverage in Black Finish

The JBL Professional SRX835 is a high-performance, passive 15-inch 3-way loudspeaker in the SRX800 series, designed to deliver exceptional sound clarity and power for a variety of applications, including as a main PA, and as rear and side fills. When paired with other SRX800 series full-range systems and subwoofers, the SRX835 forms a comprehensive and fully configurable loudspeaker system ideal for demanding audio environments such as concerts, theaters, and live events.

The SRX835 features premium JBL transducers that deliver smooth, crystal-clear sound across the entire frequency spectrum. High frequencies are handled by an annular polymer diaphragm compression driver, which features a best-in-class 3-inch voice coil and a 1.5-inch throat opening. The use of a neodymium magnet ensures that the compression driver is lightweight, efficient, and capable of delivering high power levels with reduced distortion and increased phase coherence. This results in highly accurate and detailed high frequencies, essential for clear vocal reproduction and intricate audio detail.

The SRX835 utilizes JBL's patented Differential Drive technology in its 15-inch low-frequency driver to reduce weight while maximizing power amplifier efficiency. This driver incorporates 3-inch voice coils and dual ferrite magnets, which work together to deliver extended low-frequency response with minimal distortion, providing deep, powerful bass. For midrange frequencies, the SRX835 features a specially engineered midrange transducer derived from JBL's VTX 20 touring line array system. The driver's cast aluminum frame serves as both the structural support and the acoustic cavity, optimizing the space within the speaker and improving system performance. This midrange driver provides smooth, well-defined sound between the bass and treble frequencies, contributing to the SRX835's ability to produce a balanced, full-range sound.

Designed for durability, the SRX835 features rugged 18mm plywood enclosures that are structurally sound and protected by JBL's patented DuraFlex finish, ensuring the speaker can withstand the rigors of professional use, from touring to permanent installations. The speaker is equipped with a 14-gauge steel grille that provides both protection and clarity. The SRX835's versatility is further enhanced by its 60° x 40° coverage pattern, making it suitable for a wide range of venue sizes and configurations. The loudspeaker can be used in either passive or bi-amp operation modes, providing flexibility in system design. It also includes 12 M10 suspension points and a single 36 mm pole socket for easy mounting.

The SRX835 is fully supported by JBL's Audio Architect software, which provides system integration, control, and tuning through Crown I-Tech HD amplifiers. This ensures that the SRX835 can be part of a comprehensive, fully optimized sound system. With tunings available for Crown amps and dbx signal processors, the SRX835 is an ideal choice for high-performance audio applications.

Features

• Premium JBL transducers for exceptional sound clarity and power handling
• High-frequency driver features a 3-inch voice coil and 1.5-inch throat opening, powered by a neodymium magnet
• 15-inch low-frequency driver with JBL's patented Differential Drive technology for reduced weight and improved efficiency
• Midrange driver derived from JBL's VTX 20 touring system, with cast aluminum frame for optimized performance
• Frequency range: 32 Hz to 20 kHz (-10 dB), 43 Hz to 20 kHz (-3 dB)
• Maximum SPL output of 130 dB (Peak) for powerful and dynamic sound
• 60° x 40° coverage pattern, ideal for a variety of venue sizes and configurations
• Power handling: 3200W Peak, 1600W Program, 800W Continuous
• System power rating of 3200W Peak, 1600W Program, 800W Continuous
• Rugged enclosure with 18mm plywood construction and JBL DuraFlex finish
• 12 x M10 suspension points and single 36 mm pole socket for mounting flexibility
• Equipped with a 14-gauge powder-coated steel grille with acoustically transparent black cloth backing
• Compatible with Crown I-Tech HD amplifiers and dbx signal processors for full integration into Audio Architect
• Dimensions: 18.74 x 21.4 x 38.74 inches; Weight: 95 lbs (43.09 kg)

Specifications

System

• System Type: Passive 15", three-way, bass-reflex
• Maximum SPL Output: 137 dB
• Frequency Range (-10 dB): 32 Hz to 20 kHz
• Frequency Response (-3 dB): 43 Hz to 20 kHz

Power

• System Power Rating: 3200W Peak, 1600W Program, 800W Continuous
• Nominal Impedance: 8 Ohm
• Connectors: NL4 Input, NL4 Loop-thru (+/-1 or +/-2 Selectable)
• Operational Modes: Passive/Bi-Amp

Speaker

• LF Driver: 2275H
• MF Driver: 2107H
• HF Driver: 2432H
• Coverage Pattern: 60° x 40°
• Crossover Frequency: 330 Hz & 2.4 kHz

Enclosure

• Material: 18 mm plywood
• Suspension / Mounting: Single 36 mm pole socket, 12 x M10 Suspension points
• Handles: 2
• Finish: Obsidian DuraFlex finish
• Grille: Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing
• Dimensions: 18.74 x 21.4 x 38.74 inches
• Weight: 95.0 lbs (43.09 kg)
• Shipping Weight: 105.0 lbs (47.6 kg)