Klark Teknik DN32-DANTE - Dante Expansion Module with 32 Channels of Recording/Playback for Midas M32 and Behringer X32 in Black Finish

The Klark Teknik DN32-DANTE expansion module is a high-performance audio networking solution designed for seamless integration with Midas M32 and Behringer X32 digital mixing consoles. This Dante-enabled module provides up to 32 channels of bidirectional networked audio, enabling easy and reliable integration into Dante-enabled IP networks. Dante technology, based on modern IT standards, is widely used for its ability to deliver uncompressed, multichannel digital audio over standard IP infrastructure with low latency and precise synchronization. The DN32-DANTE enhances the M32 and X32 consoles by allowing them to be part of sophisticated audio systems, enabling multichannel audio routing and control within a Dante network.

The DN32-DANTE features two Gigabit Ethernet ports that are connected through an internal switch, providing dual-redundant networking capabilities. This design ensures continuous operation in case of a failure, with the secondary Ethernet port automatically taking over if the primary port becomes unavailable. Both ports handle not only audio but also Ethernet remote control data, allowing for unified connectivity over a single network cable. The module supports up to 32 input and 32 output channels at a sample rate of 48 kHz, making it suitable for a wide range of live sound and recording applications. It also supports 44.1 kHz sample rates, offering flexibility depending on the system requirements.

The DN32-DANTE operates with Dante's Precision Time Protocol (PTP), which guarantees that all devices in the Dante network are perfectly synchronized. The onboard high-precision word clock can serve as the clock master for the entire Dante network or alternatively, the M32 or X32 console can provide the master clock, distributing it throughout the Dante system. This setup ensures sample-accurate synchronization between the consoles and other Dante-enabled devices, providing optimal performance for live sound, recording, and broadcast applications.

For remote configuration and monitoring, the DN32-DANTE is compatible with the free Dante Controller software, which is available for both PC and Mac. This software allows users to easily configure audio routing, control device parameters, and monitor network activity. The Dante Virtual Soundcard application, available for both PC and Mac, enables direct streaming of up to 32 channels of uncompressed audio to and from any Dante-enabled device over the network, providing a powerful solution for remote recording, live playback, or any other scenario that requires high-quality audio transport over IP.

With dual Ethernet interfaces and extensive support for Dante's robust network features, the DN32-DANTE ensures that Midas M32 and Behringer X32 users can easily expand their audio systems, connect to other Dante-enabled devices, and streamline their workflows. Whether used in a live concert setup, studio recording, or broadcast environment, the DN32-DANTE provides seamless, high-performance connectivity and maximum flexibility in professional audio systems.

Features

• Dante expansion module for Midas M32 and Behringer X32 digital consoles, enabling 32 channels of bidirectional audio
• Dual Gigabit Ethernet ports for simultaneous audio and Ethernet remote control data over the same cable
• Supports up to 32 input and 32 output channels at 48 kHz, with 44.1 kHz support for flexibility
• High-precision onboard word clock for sample-accurate synchronization across the Dante network
• Dual-redundant networking capability with automatic failover for continuous operation
• Compatible with Dante Controller software for remote configuration and monitoring (PC/Mac)
• Compatible with Dante Virtual Soundcard for direct streaming of up to 32 channels of uncompressed audio
• LED indicators for network activity and link speed (green for activity, amber for 1 Gbit/s link)
• Supports Precision Time Protocol (PTP) for network-wide synchronization
• Highly flexible and suitable for live sound, recording, broadcast, and large-scale audio installations
• Compact and easy to install, seamlessly integrating into M32 and X32 systems
• Dimensions: Compact design for easy integration into M32 or X32 chassis
• Compatible with Dante-enabled devices, providing flexible routing and configuration options

Specifications

Connectors

• RJ45, Gigabit Ethernet 1 GBit/s, 'PRIMARY' and 'SECONDARY': 2

Input/Output Characteristics

• Input / Output channels: 32 / 32
• Sample rates: 44.1 kHz / 48 kHz
• Sample word length: 24-Bit PCM
• Clock synchronisation, onboard high-quality Dante network clock, based upon IEEE1588 PTP (precision time control): Console 'Local' or Dante network clock 'DN32-DANTE'
• System audio latency depends on Dante Controller network configuration: 0.25 ms, 0.5 ms, 1 ms or 5 ms
• Dual-input Gigabit Ethernet ports: Ethernet Switch Mode or Dante Redundancy Mode

Indicator

• Ethernet Link, LED indicator in socket, flashes with network activity: 2 LED, green
• 1 Gbit/s Ethernet Link, LED indicator in socket: 2 LED, amber

System Requirements

• PC Hardware, minimum:
  • Dante Controller App: CPU 1 GHz, RAM 512 MB, Display 1024 x 768, Wired Ethernet interface
  • Dante Virtual Soundcard: CPU Dual Core, RAM 1 GB, Wired Ethernet interface, 1 GB/s required for channel counts higher than 32 x 32 @ 48 kHz
• Windows applications, *recommended (ASIO and WDM audio device interface):
  • Dante Controller App: XP SP3 32-Bit, Win7 32-/64-Bit, Win8 32-/64-Bit
  • Dante Virtual Soundcard: Win7 32-/64-Bit, Win8 32-/64-Bit
• Mac OSX applications (Intel CPU only, no PPC support, CoreAudio):
  • Dante Controller App: Mac OSX 10.6.8, 10.7.5, 10.8, 10.9
  • Dante Virtual Soundcard: Mac OSX 10.5, 10.6.8, 10.7.5, 10.8, 10.9