Kramer TP-580R - 4K60 4:2:0 HDMI HDCP 2.2 Receiver with RS-232 and IR over Long-Reach HDBaseT

The TP-580R is a 4K UHD, twisted pair receiver for HDMI, bidirectional RS-232 and IR signals. It supports resolutions up to 4K@60 UHD (4:2:0). The TP-580T converts HDMI, RS-232, and IR signals into a twisted pair signal that it transmits to a TP-580R receiver. The TP-580R converts the twisted pair signal back into HDMI, bidirectional RS-232 and IR signals.

Features

• High Performance Standard Extender - Professional HDBaseT extender for providing long-reach signals over twisted-pair copper infrastructures. TP-580R is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• HDMI Signal Extension - HDCP 2.2 compliant. Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals are passed through from the source to the display.
• I-EDIDPro Kramer Intelligent EDID Processing - Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Extension - Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Cost-effective Maintenance - Status LED indicators for HDMI and HDBT ports facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS-232 connection and the K-Upload tool ensures lasting, field-proven deployment.
• Easy Installation - Compact DigiTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.

Specifications

Inputs

• 1 HDBT on an RJ-45 female connector

Outputs

• 1 HDMI on an HDMI connector

Ports

• 1 IR on a 3.5mm mini jack for IR link extension,
• 1 RS-232 on a 9-pin D-sub connector for serial link extension and device firmware upgrade

Extension Line

• HDBaseT 1.0 compliant
• Up to 40m (130ft) at 4K @60Hz (4: 2: 0)
• Up to 70m (230ft) at full HD (1080p @60Hz 36bpp)
• Note: When using Kramer HDBaseT cables

Video

• Up to 10.2Gbps bandwidth (3.4Gbps per graphic channel)
• Up to 4K UHD @60Hz (4: 2: 0) 24bpp resolution
• HDCP 2.2 signal compliance
• SupPorts deep color, x.v.Color, lip sync, HDMI uncompressed Audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0

Extended RS-232

• 300 to 115200 baud rate

Control RS-232

• 115200 baud rate

POWER SOURCE

• 12V DC, 2A

POWER CONSUMPTION

• 12V DC, 430mA

ENCLOSURE

• DigiTOOLS size, aluminum type

COOLING

• Convection ventilation

OPERATING TEMPERATURE

• 0° to 40°C (32° to 104°F)

STORAGE TEMPERATURE

• -40° to +70°C (-40° to 158°F)

HUMIDITY

• 10% to 90%, RHL non-condensing

INCLUDED ACCESSORIES

• Power supply unit

Product Dimensions

• 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H

Product Weight

• 0.2kg (0.4lbs) approx.

Shipping Dimensions

• 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H

Shipping Weight

• 0.7kg (1.6lbs) approx.