Kramer TP-789Rxr - 4K60 4:2:0 HDMI Bidirectional PoE Receiver with Ethernet, RS-232 and IR over Extended-Reach HDBaseT

TP-789Rxr is a high-performance, extended-reach HDBaseT receiver for 4K60Hz (4:2:0) HDMI, Ethernet, RS-232 and IR signals and 2-way powering over twisted pair. It extends video signals to up to 100m (330ft) over Kramer copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions. This receiver either provides power over the copper extension cable to a POE (Power over Ethernet) acceptor device such as a PoE wall-plate, or accepts PoE through the extension cable from a PoE provider remote device, as auto-sensed by the receiver.

Features

• High Performance Standard Extender - Professional HDBaseT extender for providing extended-reach signals and powering over twisted-pair copper infrastructures. TP-789Rxr is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• Bidirectional PoE (Power over Ethernet) - Auto-senses the extension line PoE status and either provides power to a remote POE acceptor such as a PoE wall-plate, or accepts power from a remote PoE provider such as a PoE matrix.
• HDMI Signal Extension - Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals are passed through from the source to the display.
• I-EDIDPro Kramer Intelligent EDID Processing - Intelligent EDID pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Extension - Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Cost-Effective Maintenance - Status LED indicators for HDMI and HDBT ports and PoE feed status facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS-232 connection ensures lasting, field-proven deployment.
• Easy Installation - Single cable connectivity for both HDBaseT signals and power. Compact DigiTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.

Specifications

Inputs

• 1 HDBT: On a female RJ-45 connector

Outputs

• 1 HDMI: On a female HDMI connector

Ports

• 1 IR: On a 3.5mm mini jack for IR link extension
• 1 RS-232: On a 3-pin terminal block connector for serial link extension and device firmware upgrade
• 1 100BaseT Ethernet: On an RJ-45 female connector for LAN extension

Extension Line

• Up to 100m (330ft): At 4K@60Hz (4: 2: 0)
• Up to 130m (430ft): At full HD (1080p @60Hz 36bpp)
• Up to 180m (590ft): At HDBaseT ultra mode and full HD (1080p @60Hz 24bpp)
• Note: When using Kramer HDBaseT cables
• Standards Compliance: HDBaseT 1.0

Video

• Max. Data Rate: 10.2Gbps (3.4Gbps per graphic channel)
• Max. Resolution: 4K@60Hz (4: 2: 0) 24bpp resolution
• HDMI Support: Deep color, x.v.Color, lip sync, HDMI uncompressed Audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0

Extended Ethernet

• Up to 100Mbps Extended line rate bandwidth

Extended RS-232

• 300 to 115200 baud rate

Extended Bidirectional IR

• 20kHz to 100kHz frequency

User Interface

• Indicators: IN, OUT, LINK, PoE FEEDER and ON LED indicators
• Controls: DIP-switches

Power

• Source: 48V DC, 1.36A
• PoE: Acceptor and Provider
• Consumption: 370mA
• Consumption with PoE: 13Watt

Enclosure

• Size: DigiTOOLS
• Material: Aluminum
• Cooling: Convection ventilation

Environmental Conditions

• Operating Temperature: 0° to 40°C (32° to 104°F)
• Storage Temperature: -40° to +70°C (-40° to 158°F)
• Humidity: 10% to 90%, RHL non-condensing

STANDARDS COMPLIANCE

• Safety: CE
• Environmental: RoHs, WEEE

Accessories

• Included: Power adapter, bracket set

Product Dimensions

• 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H

Product Weight

• 0.3kg (0.6lbs) approx.

Shipping Dimensions

• 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H

Shipping Weight

• 0.7kg (1.5lbs) approx.