Luminex LumiSplit 2.10 - 10-Port DMX/RDM Splitter with 4 x 5-Pin XLR Inputs and 10 x Neutrik EtherCON Outputs in Blue Finish

The Luminex LumiSplit 2.10 is an advanced 10-Port DMX/RDM splitter specifically designed to optimize lighting control in professional environments. Featuring four 5-Pin XLR inputs and ten Neutrik EtherCON outputs, this device allows users to efficiently manage up to 320 lighting devices from a single unit, addressing the limitations typically encountered with standard DMX lines that support a maximum of 32 fixtures. This capability is especially beneficial in complex setups where fixtures are located in various positions and cannot be easily connected in a daisy chain configuration.

Beyond merely replicating DMX signals, the LumiSplit 2.10 also supports RDM (Remote Device Management) protocols, facilitating bi-directional communication between the system controller and attached devices over the DMX line. This feature enables users to remotely configure, monitor, and manage their lighting devices, significantly reducing the need for physical access to fixtures for adjustments. As the RDM standard becomes increasingly important in the entertainment industry, Luminex is dedicated to integrating these capabilities into their products to enhance user experience and preparedness for future demands.

With high port flexibility, the LumiSplit 2.10 allows for customized DMX line configurations with A/B zone selection across its two inputs and ten outputs. Users can allocate ports as needed, enabling combinations such as assigning three outputs to input A and seven to input B, offering flexibility that is unmatched by traditional splitters. The device also features various operating modes, including HTP (Highest Take Priority) and LTP (Lowest Take Priority) merging, backup mode, and regeneration mode, allowing users to adapt to diverse operational needs.

Safety is a critical aspect of the LumiSplit 2.10's design. Each DMX connector is equipped with both optical and galvanic isolation, protecting the device from potential spikes and surges that may occur on the DMX lines. This ensures that only the affected port is compromised in the event of a fault, safeguarding both the splitter and connected devices from damage. Furthermore, RDM filtering on each output prevents non-RDM compatible fixtures from interfering with the data flow, enhancing overall system stability.

The user interface of the LumiSplit 2.10 has been thoughtfully designed, featuring a front panel with RGB LED indicators that provide clear and instant status feedback. Users can easily identify selected modes, such as merging and backup, through specific LED color patterns. Additionally, the front panel can be locked to prevent accidental changes during operation, ensuring reliable performance in live settings. The device offers two user profile slots, allowing operators to save and quickly recall preferred configurations, making it a true plug-and-play solution in dynamic environments.

In summary, the Luminex LumiSplit 2.10 is a flagship DMX/RDM splitter that combines cutting-edge technology, flexibility, and user-friendly features, making it an indispensable tool for lighting professionals seeking to streamline their operations and enhance their setups.

Features

• 10-Port DMX/RDM splitter with 4 x 5-Pin XLR inputs and 10 x Neutrik EtherCON outputs, allowing control of up to 320 lighting devices.
• Supports DMX signal and RDM packet transmission for bi-directional communication and remote management.
• High port flexibility with A/B zone selection for tailored DMX line configurations.
• Multiple operating modes: HTP/LTP merging, backup mode, and regeneration mode to suit various needs.
• Full optical and galvanic isolation on each DMX connector protects against electrical surges.
• RDM filtering on every output ensures non-RDM fixtures do not disrupt data transmission.
• Enhanced front panel with RGB LED indicators for easy monitoring of device status.
• Lockable front panel to prevent accidental changes during operation.
• Two user profile slots for quick recall of custom configurations.
• Power input: 100 to 240VAC; power consumption ranges from 0.2A to 0.1A.
• Dimensions: 18.97 x 8.06 x 1.73 inches; Weight: 5.58 lbs for easy handling and installation.
• Operating temperature: 0 to 50°C; storage temperature: -10 to 70°C, ensuring reliable performance.
• Compliant with CE, RoHS, FCC Part 15, and various international safety standards for high-quality performance.

Specifications

Connectivity

• DMX Input: 4 x Neutrik 5 pin XLR (male) (2 at the front, 2 at the rear)
• DMX Output: 10x Shielded Neutrik Ethercon connectors
• Power: 1 x Neutrik PowerCON TRUE1 In/Out

DMX/RDM Features

• Supported Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
• RDM Discoverable: Yes
• RDM Filter per Input: Yes, through input button
• RDM Filter per Output: Yes, available through the front panel and RDM
• DMX Backup Mode: Yes
• HTP/LTP Merger: Yes
• Regeneration Mode: Yes, available through the front panel and RDM
• Dark Mode: Yes, available through the front panel and RDM
• DMX Zone Selection: Selection of the DMX zone per output
• User Presets: 2, can be saved and recalled from the front panel
• DMX Port Isolation: Optic and galvanic isolation per port (except THRU)
• Short Circuit Protection: Yes
• Terminated Outputs: Yes

Status Report

• Power: 1 x RGB LED on the front panel
• DMX Input: 2 x RGB LED on the front panel
• DMX Output: 10 x RGB LED on the front panel
• Lockable Front Panel: Yes

Power

• Power Input: 100 to 240VAC; 16A; 50-60Hz
• Power Output: MAX 15A
• Power Consumption: 100 to 240VAC, 0.2-0.1A; 50-60Hz
• Fuse: No user-serviceable fuse

Physical

• Dimensions: 18.97 x 8.06 x 1.73 inches
• Weight: 5.58 lbs
• Packaging: 20.86 x 12.99 x 3.14 inches

Environmental

• Operating Temperature: 0 to 50C
• Storage Temperature: -10 to 70C
• Humidity: 5 to 95%

Approvals

• Certifications: CE, RoHS Compliance, FCC Part 15, CFR 47, Class A
• Standards: UL 60950-1, CAN/CSA-C22.2 No.60950-1, CAN/ICES-003(A), IEC 60950-1, EN 60950-1, EN55022 (CISPR22), EN55024 (CISPR24)