Martin Pro ELP Par IP - 7 x 40W RGBW LED IP65-Rated Par with 5.5 to 50-Degree Zoom and Hanging Bracket in Black Finish

The Martin Professional ELP PAR IP is a powerful and versatile LED par fixture designed to meet the highest standards of performance, durability, and flexibility. This IP65-rated fixture is perfect for both indoor and outdoor applications, offering exceptional protection against water and dust, making it an ideal choice for use in wet locations or temporary outdoor installations. Featuring 7 x 40W RGBW LEDs, the ELP PAR IP produces stunning, full-spectrum color mixing, allowing lighting designers to create vibrant washes, beam effects, and dynamic stage lighting. With a wide color temperature range of 1800K to 12,850K, users can easily achieve everything from warm, atmospheric lighting to cool daylight effects, providing versatility across various environments and production types.

Designed with ease of use in mind, the ELP PAR IP boasts a range of smart features that enhance both its performance and ease of installation. The quick-focus mode allows for fast and efficient setup without requiring a console operator, while the clear projection angle indicators simplify alignment and positioning. This helps streamline the installation process, making it ideal for events that require quick turnarounds. Additionally, the ELP PAR IP offers a motorized zoom range from 5.5° to 50°, enabling lighting professionals to adjust the beam from a narrow, focused spot to a wide wash, making it suitable for both tight mid-air beam effects and broad stage illumination.

In terms of color control, the ELP PAR IP excels with its advanced color calibration system, ensuring that color reproduction is precise and accurate. It offers 48 color presets and virtual color wheel effects, giving designers the flexibility to create dynamic and visually engaging lighting sequences. The fixture also features 16-bit dimming with four selectable dimming curves, offering smooth transitions from 0 to 100% brightness, along with strobe and pulse effects for added versatility. The color temperature control (CTC) feature allows fine-tuning of the white balance from 1,800K to 12,850K, providing complete control over the fixture's output for a variety of applications, including television, theatre, and live events.

The ELP PAR IP is built for high-performance and low-noise operation. Its temperature-regulated forced air cooling system ensures efficient heat dissipation, even under full intensity, while maintaining a quiet operation suitable for venues where noise control is critical, such as theatres or broadcast studios. The housing is constructed from durable aluminum and composite materials, ensuring long-lasting reliability and robustness in outdoor environments. The fixture is equipped with Neutrik PowerCON TRUE1 for reliable power connection and IP-rated 5-pin locking XLR connectors for DMX/RDM data in and out, ensuring secure and stable connections even in challenging environments.

Features

• 7 x 40W RGBW Osram LEDs for vibrant, full-spectrum color mixing
• IP65-rated for water and dust protection, suitable for both indoor and outdoor use
• Wide color temperature range from 1,800K to 12,850K for versatile lighting effects
• Motorized zoom range of 5.5° to 50° for precise beam shaping and wide wash effects
• 48 color presets and virtual color wheel effects for dynamic color control
• 16-bit dimming with four selectable dimming curves for smooth intensity transitions
• Strobe and pulse effects, as well as electronic shutter effect for instant open and blackout
• Advanced color calibration system for accurate color reproduction
• Quick-focus mode and clear projection angle indicators for easy installation and setup
• Flicker-free operation, ideal for TV, film, and live events
• Temperature-regulated, low-noise forced air cooling system for efficient heat dissipation
• Neutrik PowerCON TRUE1 for reliable power input and output
• IP-rated 5-pin XLR connectors for DMX/RDM data in and out
• Durable aluminum and composite housing with IP65 rating for outdoor environments
• Available in black or white finish to suit various installation needs

Specifications

Physical

• Length: 12.4 inches
• Width: 11.3 inches
• Height: 15.7 inches with bracket
• Weight: 20.1 lbs

Dynamic Effects

• Color mixing: RGBW
• Color presets: 48 color presets, virtual color wheel effects
• Zoom: Motorized
• Electronic dimming: 0 - 100%, four dimming curve options
• Strobe and pulse effects: Variable speed and action, random strobe
• Electronic shutter effect: Instant open and blackout
• Color temperature: Variable 1,800 - 12,850 K

Control and Programming

• Control options: DMX, RDM
• 16-bit fine control: Dimming, RGB, Zoom
• LED color management modes: Raw, extended and calibrated
• DMX address setting: Control panel with OLED display
• DMX channels: 14
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20

Optics

• Light source: 7 x 40 W RGBW Osram LEDs
• Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
• Beam angle (half-peak): 4.4 - 33.3°
• Field angle (one-tenth peak): 5.5 - 50.0°
• Binning: Tight color and flux binning
• Calibration: Full Gamut and Color Calibration
• Maximum output: 3,350 lumens
• *Figure obtained under manufacturer´s test conditions

Photometric Data

• Wide beam: 3,350 lumens
• Narrow beam: 1,626 lumens
• Fixture Center Intensity Narrow Beam: 329,058 cd
• Fixture Center Intensity Wide beam: 10,141 cd
• CRI (Color Rendering Index): >70
• CQS (Color Quality Scale): 84
• TM-30 Rf (IES TM-30-15 Fidelity Index): 79
• TM-30 Rg (IES TM-30-15 Gamut Index): 116
• TLCI (Television Lighting Consistency Index): 61
• CCT: 6,500 K
• LED refresh rate - Standard Mode: 3,600 Hz
• LED refresh rate - Theatre Mode: 19,200 Hz
• *All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

Construction

• Housing: Aluminum and composite
• Filter mount: 7.5 x 7.5 inches
• Color: Black
• Ingress protection rating: IP65

Installation

• Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket)
• Location: Wet locations, temporary outdoor use, not for household use
• Orientation: Any
• Minimum distance to combustible materials: 1.7 ft.
• Minimum distance to illuminated surfaces: 3.3 ft.
• Minimum clearance around fan and air vents: 1.7 ft.

Connections

• AC power in, thru: Neutrik PowerCON TRUE1 TOP
• DMX data in, thru: Neutrik IP-rated 5-pin locking XLR

Electrical

• AC power: 100-240 V AC nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Typical half-cycle RMS inrush current at 230 V, 50 Hz: 11.2 A
• Power Factor: 0.99 @ 100 V / 120 V, 0.94 @ 220 V / 230 V / 240 V
• Typical current draw: 3.7 A @ 100 V / 120 V, 1.7 A @ 220 V / 230 V / 240 V *
• Power Consumption
  • Typical: 300 W *
  • Hibernation: 2 W *
  • *Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  • Typical: full output white, no effects moving, regulated fan speed.
  • Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

Thermal

• Cooling: Forced air (temperature regulated, low noise)
• Total heat dissipation*: 1126 BTU/hr.
• *Calculated, +/- 10%, at full intensity, full white
• Maximum surface temperature: 160° F
• Maximum ambient temperature (Ta max.): 104° F
• Minimum ambient temperature (Ta min.): 14° F

Acoustic Data

• Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 40.9 dB(A)
• Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 37.9 dB(A)

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 14.3 lm/W
• LWR*: 385 lm/kg (174 lm/lb)
• LWR = Lumen-to-Weight Ratio

Approvals

• Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class B
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class B, ICES-005 Class B
• Australia/NZ: RCM
• United Kingdom: UKCA

Included Items

• Adjustable mounting bracket

Accessories

• Power Input Cables
  • Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 4.9 ft.: P/N 91611797
  • Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 4.9 ft.: P/N 91610173
• Power Relay Cables
  • Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 8.2 ft.: P/N 91611796
  • Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 8.2 ft.: P/N 91610172
• Power Connectors
  • Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU
  • Cable Connector, Neutrik powerCON TRUE1 NAC3MX-W TOP (male): P/N 91611788HU
• Installation Hardware
  • Martin Omega bracket for rigging clamp attachment: P/N 91602001
  • Half-coupler clamp: P/N 91602005
  • G-clamp (suspension vertically downwards only): P/N 91602003
  • Quick-trigger clamp (suspension vertically downwards only): P/N 91602007
  • Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  • Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Related Items

• Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
• Martin Companion Cable USB/DMX hardware interface: P/N 91616091

Ordering Information

• ELP PAR IP in cardboard box: P/N MAR-90800010
• ELP PAR IP - White in cardboard box: P/N MAR-90800015