Martin Pro Exterior Wash Pro L Quad - 16 x RGBW LED IP66-Rated Wash with 8-Degree Beam and 1000K to 12500K CCT in Gray Finish

The Martin Professional Exterior Wash Pro L QUAD is an advanced, high-performance wash fixture engineered for permanent outdoor installations. Designed to illuminate large structures, building facades, and other architectural surfaces, this versatile fixture is perfect for a wide range of lighting applications. With its robust construction and exceptional color performance, the Exterior Wash Pro L QUAD is ideal for environments requiring powerful, dynamic lighting solutions in challenging conditions.

Equipped with 16 high-power RGBW LEDs, the Exterior Wash Pro L QUAD offers an impressive color temperature range from 1000K to 12,500K, allowing for a full spectrum of whites - from warm tones at 1000K to cooler, daylight-like 12,500K. The fixture's dedicated color temperature control channel ensures that it accurately follows the black-body curve, providing smooth, natural color transitions. This feature makes the fixture highly suitable for applications requiring precise control over white light, such as architectural lighting and large outdoor events.

The Exterior Wash Pro L QUAD's 8° native beam angle delivers high intensity and long-range projection, making it ideal for reaching high facades and distant structures. For greater versatility, the fixture includes externally mounted micro lens diffusers that enable beam angle customization, offering a range of options from narrow to wide (10°, 16°, 30°, 54°, and an asymmetric 9° x 56°). An optional baffle snoot is available for added control over stray light, allowing for highly focused, long-range applications.

With a light output of up to 7100 lumens, the Exterior Wash Pro L QUAD offers exceptional brightness and efficiency. The fixture's color mixing capability ensures smooth, seamless transitions between colors, while the factory calibration guarantees superior color consistency across the entire range. The integrated color boost technology enhances the saturation and brightness of both mixed and single colors, providing up to three times brighter output compared to previous models.

Built for harsh environmental conditions, the Exterior Wash Pro L QUAD features an IP66-rated housing that ensures protection against dust, water, and corrosion. The housing is constructed from durable cast aluminum with an anodized and electrostatic powder-coated finish, making it highly resistant to wear and tear, even in marine or industrial environments. With an IK08 impact rating, the fixture is also designed to withstand physical impact, providing reliable performance in demanding installations.

For ease of use and flexibility, the Exterior Wash Pro L QUAD offers RDM and DMX control options. It supports stand-alone programming via Martin Companion software, allowing users to create up to 20 scenes with adjustable fade and hold times. The onboard magnetic sensor facilitates local diagnostics and focusing, ensuring quick setup and maintenance. The fixture also offers 8-bit control of each color and 16-bit dimming for smooth intensity adjustments, ensuring precise control over lighting effects.

With its compact, lightweight design and low environmental impact, the Exterior Wash Pro L QUAD is an efficient and cost-effective solution for large-scale outdoor installations. Backed by a 5-year warranty and meeting stringent environmental standards, this fixture is a reliable and high-performance option for architects, lighting designers, and production teams seeking a versatile, weather-resistant wash light.

Features

• 16 high-power RGBW LEDs with a color temperature range of 1000K to 12,500K for precise white light control
• Dedicated color temperature control channel following the black-body curve for natural, seamless transitions
• 8° native beam angle for intense, long-range projection with externally mounted micro lens diffusers offering various beam options
• Optional baffle snoot for minimizing stray light and ensuring focused projections
• Up to 7100 lumens output with color boost technology for up to three times brighter saturated and mixed colors
• Factory color calibration ensures superior color consistency across all color temperatures
• IP66-rated housing for weatherproof performance, with IK08 impact resistance for added durability
• RDM and DMX control options with stand-alone programming via Martin Companion software
• Onboard magnetic sensor for local diagnostics and focusing
• Compact and lightweight design for easy transport and installation
• 5-year warranty and low total cost of ownership

Specifications

Physical

• Length: 6.49 inches
• Width: 10.83 inches
• Height: 14.57 inches
• Weight: 27.3 lbs

Dynamic Effects

• Intensity: 0 - 100%
• Color mixing: RGB + CTC (Color Temperature Control)
• Color temperature control: 1000 K - 12500K in 50K steps

Control and Programming

• Control systems: DMX, RDM
• User interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• Control resolution: 8-bit DMX control of each color
• Dimmer Resolution: 16-bit DMX control of intensity
• DMX channels: 6/3/7/4 (Standard/Basic/Extended/Raw)
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• DMX/RDM Transceiver: Galvanic-isolated RS-485
• Firmware update: Serial upload via DMX link

Optics

• Light source: 16 x high-power RGBW LEDs
• Minimum LED lifetime: 100,000 hours (to > 70% luminous output)*
• LED manufacturer: Osram
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
• *Figure obtained under manufacturer's test conditions at Ta = 25° C.

Beam Angle Options

• Native beam angle: 8°
• Narrow micro lens: 10°
• Medium micro lens: 16°
• Wide micro lens: 30°
• Very Wide micro lens: 54°
• Asymmetric micro lens: 9° x 56°

Photometric Data

• CRI (Color Rendering Index): > 70
• CCT: 1000K - 12500K (Default 4000K)
• Luminous Output:
  • Full: 7100 lumens
  • Red: 2280 lumens
  • Green: 4550 lumens
  • Blue: 1870 lumens
• *All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

• Housing: Cast Aluminum
• Color: Traffic grey RAL 7042 or Traffic white RAL 9016 - other colors available on request
• Surface treatment: Anodized and electrostatic powder-coated
• Protection rating: IP66
• Effective Projected Area (EPA): 0.097 m2 / 0.120 m2
• Impact resistance: IK08
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum distance to illuminated surfaces: 0.3 ft.

Connections

• Power connection: 6.5 ft. cable tail open ended
• Power input cable type, EU models: H07RN-F 3G 1.0 mm2, 450/750V, VDE
• Power input cable type, US models: PVC SJTW 3 x 1.31 mm2 (16AWG) 105°C 300 V VW-1
• Data connection: 6-conductor combined input + output cable tail
• Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

Electrical

• AC power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 13 A
• Surge protection: 4 KV
• Max earth leakage: 0.5 mA
• Power factor: 0.99 @110 V / 120 V, 0.95 @208 V / 230V, 0.92 @277 V
• Max current draw: 1.50 A @100 V, 1.25 A @120 V, 0.65 A @230 V, 0.54 A @277 V
• Power Consumption
  • Maximum: 150 W (reduced mode 120W)
  • Idle: 3.5 W
• * Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity

Thermal

• Cooling: Convection
• Maximum ambient temperature: 113° F (45° C)
• Minimum ambient temperature: -22° F (-30° C)
• Total heat dissipation (calculated, +/- 10%): 512 BTU/hr

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 43 lm/W
• LWR*: 516 lm/kg (234 lm/lb)
• *LWR = Lumen-to-Weight Ratio
• Packaging: FSC certified cardboard inlay and outer box

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian safety: CSA C22.2 No. 250.0
• Canadian EMC: EMC:ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322(Part5/section5)

Accessories

• Micro Lens Pro L - Narrow: P/N MAR-90590036
• Micro Lens Pro L - Medium: P/N MAR-90590037
• Micro Lens Pro L - Wide: P/N MAR-90590038
• Micro Lens Pro L - Very Wide: P/N MAR-90590039
• Micro Lens Pro L - Asymmetric: P/N MAR-90590040
• Baffle Snoot Pro L QUAD: P/N MAR-90590019
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
• Attachment plate for safety wire: P/N MAR-90590050

Ordering Information

• Exterior Wash Pro L QUAD, US, grey: P/N MAR-90590007