Quasar Science 4-Pack of 4FT Rainbow 2 RGB LED Tubes with Accessories and Hard Case

Arrive on set with all the Quasar Science lights and accessories you'll need in one slim, heavy-duty, water-proof case. High density foam protects every piece in its designated compartment. With a quick glance, you know where everything is, so set-up, wrapping and inventory couldn't be easier.

Each kit comes with a full set of lights and accessories, plus the addition of Ossium Magnets, Rotators, and Battery Plates. Everything you need for a lighting set up in one place.

Waterproof cases, molded of ultra high-strength polypropylene copolymer resin, resist corrosion and impact damage. Each case is gasket-sealed, water and dust tight, and submersible. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, and automatic ambient pressure equalization, offering maximum protection for your lights.

Each customized compartment is made of water jet cut TopGuard PE Foam, according to Quasar Science's specifications. The foam's dense top layer defends against degradation for long lasting protection.

With every part of the RR Kit having a designated compartment, wrapping is easy and keeping inventory can be done with a simple visual survey. The slender case has a small footprint for travel and storage.

Carry or wheel the kit anywhere you need to go, even on a plane. With bonus Ossium Magnets, Battery Plates and Rotators, the RR Kits offer the biggest bang for the buck.

With a maximum total AC draw of under 200 watts, any single outlet will satisfy your power needs. And of course, there is always the option to use batteries.

Features

• Four Lights, Accessories & Hard Case
• For Portability and Mounting Options
• Output: 91.9 Lux at 9.8' for Each Light
• 1750-10,000K CCT; RGB Mode
• Onboard, DMX, CRMX & App Control
• CRI 95 | SSI 91 | TM-30 94
• 20 Preset Special Effects
• AC Power; Includes Ossium Battery Plate
• Optional Battery Power
• Includes AC Power Cables

Specifications

Fixture

• Item Type: 1x LED Light Tube/Wand
• Included Storage Case: No
• Lumens: 2843
• Photometrics:
• 3200K:
  • 66 fc / 711 Lux at 3.3' / 1 m
  • 7 fc / 79 Lux at 9.8' / 3 m
• 5600K:
  • 76 fc / 828 Lux at 3.3' / 1 m
  • 8 fc / 92 Lux at 9.8' / 3 m
• Color Temperature: 1750 to 10,000K
• Color Modes: RGB
• Color Accuracy Standard: CRI 95, TLCI 95
• Dimming: Built-In Dimmer (Continuous), 0 to 100%
• Cooling System: Passive
• Expected Lamp Life: 25,000 Hours
• Beam Angle: 180°
• Built-In Flash: No
• Umbrella Mount: No
• Front Accessory Mount: Proprietary

Connectivity

• Wireless Remote Control Type: Bluetooth, Wi-Fi, Wireless CRMX, Wireless DMX
• Mobile App Compatible: Yes (Android and iOS)

Power & I/O

• Power Source: AC Power (Cable Included)
• Battery (Not Included)
• Inputs/Outputs: 1x powerCON TRUE1 Power Input, 1x Barrel / Coax (2.1 x 5.5 mm) Battery/Power Input, 1x RJ45 DMX Input, 1x RJ45 DMX Output
• Input Power: 12 to 30 VDC, 120 to 240 VAC, 50 / 60 Hz
• Included Adapter / Cable: 1x USA Type-A/B to powerCON TRUE1 Cable (8' / 2.4 m), 1x P-Tap to Barrel / Coax Cable
• Inline Switch: No
• Power Pass-Thru: No
• Power Consumption: 50 W

Mounting

• Fixture Mounting: 1x 1/4"-20 Female Thread

Environmental

• Environmental Protection: Dust-Resistant (IP40)

General

• Display: OLED
• Certifications: ETL, FCC, cETL
• Materials: Aluminum, Plastic (Housing)
• Dimensions: 47.1 x 2 x 1.8 inches
• Weight: 3.3 lbs