International Shipping Available

PRICING SUBJECT TO CHANGE WITHOUT NOTICE DUE TO POTENTIAL IMPORT COST FLUCTUATIONS

2025 Savings!
Use Code: 10NY2025
RCF ND950 2.0 - 280W 4-inch Titanium Compression Driver with 2-inch Exit Throat and 8-Ohm Impedance in Black Finish

RCF ND950 2.0 - 280W 4-inch Titanium Compression Driver with 2-inch Exit Throat and 8-Ohm Impedance in Black Finish

RCF ND940 - 280W 4-inch Titanium Compression Driver with 1.4-inch Exit Throat and 8-Ohm Impedance in Black Finish

RCF ND940 - 280W 4-inch Titanium Compression Driver with 1.4-inch Exit Throat and 8-Ohm Impedance in Black Finish

RCF ND950 1.4 - 280W 4-inch Titanium Compression Driver with 1.4-inch Exit Throat and 8-Ohm Impedance in Black Finish

$569.00
The RCF ND950 1.4 is a 280W 4-inch Titanium Compression Driver with 1.4-inch Exit Throat and 8-Ohm Impedance in Black Finish.
SKU
RCF-15129038
UPC
N/A

The RCF ND950 1.4 is a high-performance, ultra-compact 4-inch diaphragm compression driver, designed to deliver exceptional sound quality in professional audio applications. Equipped with a 1.4-inch exit throat, this driver offers superior power handling and high efficiency, thanks to its advanced neodymium magnet assembly. This robust magnetic system ensures perfect control over the dome assembly's moving mass, resulting in improved transient response, greater efficiency, and reduced high-frequency distortion.

The ND950 1.4 features a 0.05 mm thick pure titanium dome that is paired with a high-strength Mylar suspension. The combination of these materials provides excellent durability and performance, while the high-temperature Kapton voice coil former ensures the driver can handle the heat generated during high power usage. Additionally, the edge-wound copper-clad aluminum wire used in the voice coil assembly allows for optimal power handling and efficiency. The driver also boasts a 4-slot optimized phase plug design that was developed through advanced computer-assisted modeling, which reduces air distortion and maximizes output for superior sound quality.

With a frequency range of 500 Hz to 20 kHz and a sensitivity of 110 dB, the ND950 1.4 compression driver is capable of delivering clear, powerful sound across a wide spectrum. The driver handles 280W of continuous program power at 8 ohms, making it ideal for integration in professional systems requiring high output and low distortion. Additionally, a copper inductance ring is precision-pressed onto the pole piece to further extend the frequency response and improve the driver's overall performance.

The ND950 1.4 is the smallest available 4-inch driver in its category, making it an excellent choice for space-limited installations where performance cannot be compromised. Its neodymium magnet assembly ensures high flux density, contributing to its compact size and powerful output. This driver's unique combination of features allows it to perform flawlessly in high-powered systems, including line arrays and point source applications.

Features

  • 4-inch diaphragm with a 1.4-inch exit throat for high power handling and efficiency
  • 280W continuous program power handling with a frequency range of 500 Hz - 20 kHz
  • 4-slot optimized geometry phase plug to minimize distortion and maximize output
  • Pure titanium diaphragm, 0.05 mm thick, paired with a flat polyimide suspension for enhanced durability
  • Copper inductance ring for extended frequency response and improved high-frequency performance
  • High-efficiency neodymium magnet assembly for precise control over the moving mass
  • 110 dB sensitivity for clear and efficient sound reproduction
  • Compact design with a minimal size, making it ideal for space-constrained installations
  • CE compliant for safety standards and reliable performance in professional environments

Specifications

General Specifications

  • Exit Throat Diameter: 1.4 inch / 36 mm
  • Related Impedance: 8 ohm
  • Program Power (watt): 280 W
  • Power handling capacity: 140 W
  • Sensitivity: 110 dB
  • Frequency range: 500 - 20000 Hz
  • Diaphragm Material: Pure Titanium
  • Suspension Material: Polyimide
  • Suspension Design: Flat
  • Minimum Impedance (ohm): 8.50 ohm
  • Voice Coil Diameter: 4.0 inch / 102 mm
  • Voice Coil Winding Material: Edgewound Aluminum
  • Voice Coil Former Design: Direct Drive Kapton
  • Number of layers: 1
  • Kind of layers: inside/outside
  • Flux Density: 2.0 T
  • Phase Plug Design: 4 slot
  • Phase Plug Material: Aluminum
  • Magnetics: Neodymium
  • Voice Coil Demodulation Ring: Copper

Thiele (small parameters)

  • Bl factor (Bl) (T x m): 17.60 T x m

Mounting Information

  • Overall diameter: 146 mm / 5.75 inches
  • Overall height: 60 mm / 2.36 inches
  • Mounting: 4 x 6 mm threaded holes at 90°

Standard Compliance

  • Safety agency: CE compliant

Size/Weight

  • Weight: 7.72 lbs

Shipping Information

  • Package Height: 3.11 inches
  • Package Width: 6.65 inches
  • Package Depth: 6.73 inches
  • Package Weight: 8.16 lbs