Astera LunaBulb PrepCase Kit - Set of 8 LunaBulbs with Battery Powered PrepCase and Titan Charger

The Astera LunaBulb PrepCase Kit is a set of 8 LunaBulbs stored in a durable protective plastic case with a handle. The PrepCase has a built-in battery which will make prepping easy no matter when and where you need to set up and configure your LunaBulbs for a job. The LunaBulb PrepCast Kit includes 8x FP7 LunaBulb, 1x FP7-PRPCSE LunaBulb PrepCase and 1x FP1-CHR Titan Charger.

Save Time and Effort

Time is always of the essence. With the PrepCase having a built-in battery, you don't need to worry about when and where you prep your LunaBulbs, because that can be done anytime whether it's for Standalone, App or DMX control. One display can rule them all.

Battery Powered PrepCase

Astera developed the PrepCase with a built-in battery with the purpose of saving time and effort no matter where you are. The PrepCase fully charged will run around 1 hour, when the LunaBulbs is set to 4000K and MAX brightness. You can always hardwire the PrepCase if needed.

Configure LunaBulbs

Prepare your color temperature, color, or brightness level settings directly in the case, without the need of AC sockets nor App pairing. The interface is so easy that any freelancer can operate it without training. If you want to control via DMX, then you can decide which DMX address you want to start with and all LunaBulbs in the case will receive the same or subsequent DMX addresses. The units will remember the settings to maximize speed and control.

BlueMode Lights

With two button presses, you can have all 8 LunaBulbs in BlueMode, being ready to be paired with the AsteraApp. Astera added a BlueMode button in the PrepCase to speed up the process when the desire is to control the LunaBulbs with the AsteraApp.

Bluetooth Bridge (BTB)

Astera developed the PrepCase with the BTB function. When prepping your LunaBulbs you will now always have Bluetooth Bridge nearby, which gives you the option to have the PrepCase act as an AsteraBox. Pair your lights to the AsteraApp, make the needed changes and you are all set.

Features

Product Overview

• Astera LunaBulb PrepCase Kit: includes 8 LunaBulbs in a durable plastic case.
• Comes with FP7 LunaBulbs, a PrepCase, and a Titan Charger.

Convenience and Portability

• Built-in battery for prepping anywhere, anytime.
• Battery lasts around 1 hour at 4000K and MAX brightness.
• Can be hardwired if necessary.

Efficiency and Ease of Use

• Save time by prepping LunaBulbs on-site without AC sockets or app pairing.
• Simple interface for freelancers to operate without training.
• Allows setting color temperature, color, and brightness directly in the case.

Configuration and Control

• Easy DMX address assignment for all bulbs in the case.
• Settings are retained to enhance speed and control.

BlueMode and Bluetooth Integration

• BlueMode button for quick pairing with the AsteraApp.
• Bluetooth Bridge (BTB) function acts as an AsteraBox for app control.

Time-Saving Features

• Efficiently manage LunaBulbs for standalone, app, or DMX control.
• Centralized display and controls streamline the setup process.

Specifications

Battery

• Battery Runtime: 2 hours
• Battery Lifetime: 70 % after 300 cycles
• Charging Time (nominal): 2 hours 50 min

Power

• AC Input (via FP1-CHR): 100 - 240 VAC, 50/60 Hertz, 1.8 A
• DC Input: 2 A / 24 VDC; 48 W
• DC Connector: 5.5 mm / 2.1 mm
• Power Consumption (max.): 37 W

Control

• BluetoothBridge BTB: Built-in
• Wireless Protocols: UHF, Bluetooth, WiFi
• Wireless Range: UHF up to 300 meters, Bluetooth up to 3 meters

Construction

• Housing Material: Metal and Polymer
• IP Rating: IP 20
• Ambient Operating Temperature: 32F - 104F
• Weight full (8x FP7 and 1x FP1-CHR): 14.46 lbs
• Dimensions: 16.34 x 13.19 x 7.2 inches