JBL VLA601i - 1000W 2 x 15-inch Passive 3-Way Full-Range Line Array Loudspeaker with 2 x MF/3 x HF Drivers and 60-Degree Horizontal Coverage in Black Finish

The JBL Professional VLA601i is a powerful, full-range 3-way passive loudspeaker designed for permanent installations requiring high-output sound reinforcement and precise coverage. Part of the JBL VLAi Series, this 1000W line array loudspeaker delivers high-performance sound, making it ideal for large venues, concert halls, and outdoor events where high intelligibility, even coverage, and high sound-pressure levels are crucial. The VLA601i provides 60-degree horizontal coverage, offering expansive sound distribution over large areas. The loudspeaker is specifically built to handle extended throw distances, making it perfect for large-scale applications where traditional speakers might fall short.

With its combination of 2 x 15-inch low-frequency (LF) drivers, 2 x mid-frequency (MF) drivers, and 3 x high-frequency (HF) drivers, the VLA601i delivers deep bass, clear mids, and detailed highs across a wide frequency range of 41 Hz to 20 kHz. The speaker achieves a maximum peak output of 150.7 dB SPL, ensuring high-impact sound across large spaces. The JBL VLA601i features a modular design, enabling flexible configuration for various venue sizes and setup requirements. Whether in large line arrays or smaller distributed clusters, the VLA601i delivers optimal sound reproduction without sacrificing clarity or power.

Built using JBL's patented Differential Drive technology, the VLA601i incorporates advanced transducers for maximum efficiency and minimal weight. The low-frequency section features 2 x JBL 2265H 15-inch woofers with dual 3-inch voice coils for robust bass output. The midrange section incorporates 2 x JBL 2169H 8-inch drivers, while the high-frequency section uses 3 x JBL 2492H compression drivers, providing crystal-clear highs. The system uses an external tri-amp crossover, with crossover frequencies set at 230 Hz and 1.4 kHz, and is optimized with custom DSP processing to ensure accurate and seamless frequency response.

Designed for durability and environmental resilience, the VLA601i has an enclosure made from 12-ply birch plywood, ensuring strength and longevity in permanent installations. The speaker is IP56-rated, meaning it is resistant to water and dust, making it suitable for both indoor and outdoor applications. The VLA601i is available with optional weather-resistant versions (WRC and WRX), with the WRC version designed for sheltered outdoor placement, offering additional protection against the elements. The speaker also features a rugged powder-coated grille, providing protection from physical damage while maintaining acoustic transparency.

Features

• 1000W power rating with 2 x 15-inch woofers, 2 x mid-frequency drivers, and 3 x high-frequency drivers for high-output sound reinforcement.
• Frequency range: 41 - 20 kHz, with 60-degree nominal horizontal coverage for consistent and broad sound distribution.
• Maximum peak output of 150.7 dB SPL, ensuring powerful sound across large venues.
• Advanced JBL Differential Drive technology for high output, low weight, and efficient performance.
• IP56 environmental protection rating for resistance to dust and water, ensuring reliability in harsh conditions.
• External tri-amp crossover system with custom DSP processing for optimized sound performance and frequency management.
• Durable 12-ply birch plywood enclosure with a rugged DuraFlex finish for long-lasting reliability.
• 16 suspension points for flexible rigging and secure installation in various configurations.
• Weather-resistant versions (WRC and WRX) available for both sheltered and extreme outdoor use.
• Dimensions: 20.8 x 53.0 x 30.2 inches.
• Weight: 255 lbs.

Specifications

System

• Frequency Range (-10 dB): 41 - 20 kHz
• Frequency Range (-6 dB): 45 - 19.5 kHz
• Frequency Range (-3 dB): 50 - 19.2 kHz
• Coverage Pattern
  • Horizontal: 60° Nominal (500 - 16 kHz)
  • Vertical: Varies with Array size and configuration
• System Sensitivity (2.83V @ 1m):
  • LF (2.83V @ 1m / 1W @ 1m): 99dB / 96dB
  • MF (2.83V @ 1m / 1W @ 1m): 104dB / 104dB
  • HF (2.83V @ 1m / 1W @ 1m): 115dB / 112dB
• System Impedance
  • LF: 4 ohms
  • MF: 8 ohms
  • HF: 4 ohms
• System Power Rating
  • LF (100hrs/2hrs): 1000W / 1100W
  • MF: 550W
  • HF: 350W
• Maximum Peak Output:
  • System: 150.7 dB SPL
  • LF: 139.4 dB SPL
  • MF: 146.4 dB SPL
  • HF: 145.4 dB SPL
• System Processing
  • Crossover: External Tri-Amp
  • Crossover Frequencies: 230 Hz, 1.4 kHz
  • Recommended Processing: Custom DSP Processing (IIR and FIR) for Crown ITHD, IT4x3500HD and DCIN, and DCi-DA

Transducers

• Low Frequency: 2 x JBL 2265H, 15 inch diameter, dual 3 inch diameter voice coil, Neodymium Differential Drive
• Mid Frequency: 2 x JBL 2169H, 8 inch diameter, dual 3 inch diameter voice coil, Neodymium Differential Drive
• High Frequency: 3 x JBL 2492H, 1.5 inch exit compression driver, 3 inch voice coil
• Transducer Power Rating:
  • LF: 1400W / 1700W
  • MF: 500W
  • HF: 250W

Physical

• Enclosure: Rectangular 18mm and 16mm (5/8 in) exterior grade Baltic birch plywood
• Finish: Standard finish and optional weather resistant versions (WRC and -WRC) available. Back Duraflex finish. White (WH) available upon request.
• Grille: Powder coated 14 gauge perforated steel with cloth backing
• Additional Grille: Three-layer powder coated 16 gauge perforated stainless steel with cloth backing and stainless steel mesh.
• Environmental IP Rating: IP56
• Suspension: 16 points (4 top and bottom, 4 each side), threaded M10. Additional sealing neoprene stainless steel washers.
• Input Connectors: Barrier strip for #6 spade lug, including gland nut and cover plate.
• Dimensions: 20.8 x 53.0 x 30.2 inches
• Weight: 255 lbs