Vari-Lite 53805-236 - Quad 20A 0-10V Module for RigDim 277V Enclosure in Black Finish

The Vari-Lite 53805-236 Quad 20A 0-10V Module for RigDim 277V Enclosure is an essential component for theaters, entertainment venues, and other installations requiring high-performance dimming control. This module is specifically designed for reliable dimming of Advance Mark 7 fluorescent dimming ballasts, making it an ideal choice for applications that require fine control over fluorescent lighting. The RigDim 0-10V modules are engineered to offer precision and flexibility while ensuring compatibility with a range of fixtures, allowing for seamless integration into existing RigDim Enclosures.

Each RigDim module is built with identical mounting dimensions, ensuring that they can be easily swapped between different configurations within the RigDim Enclosures. The system is designed to allow for easy expansion and modification based on specific power and control requirements. With a focus on user-friendly operation, the 53805-236 Quad 20A 0-10V module features a "Focus Button" on each circuit. This button enables easy manual control, including turning the circuit on to full intensity, turning it off, or ramping it up to full intensity by pressing and holding the button. If the button is released before full intensity is reached, the dimmer will stop at the relative output, providing flexible control during setup and testing.

It is important to exercise caution during installation, as applying power to the cabinet during module installation may expose users to dangerous voltage and cause potential damage to the device. As a safety precaution, always ensure the power is off before installing the module. Only qualified electricians should handle installation to ensure proper and safe integration within the RigDim Enclosure.

The RigDim 53805-236 Quad 20A 0-10V Module operates efficiently in 277VAC environments and is rated for a maximum load of 4000W per circuit, making it suitable for larger, high-demand installations. The module supports a minimum load of 140W per circuit, allowing for a broad range of use cases, from smaller lighting setups to more substantial lighting systems. The module operates using natural convection for cooling, ensuring quiet operation, which is essential for nearstage and other noise-sensitive installations. It can operate in ambient temperatures ranging from 32°F to 104°F and is designed to handle relative humidity levels between 5-95% non-condensing, making it adaptable to various environmental conditions.

Features

• Designed for use with Advance Mark 7 fluorescent dimming ballasts
• Four circuits per module with 0-10V dimming control
• Rated for 277VAC operation with a maximum load of 4000W per circuit
• Focus button for easy manual control: turn on/off or ramp to full intensity
• Flexible and user-friendly design, compatible with all RigDim enclosures
• Supports minimum load of 140W per circuit
• Natural convection cooling for fanless operation and reduced noise
• Ambient operating temperature range: 32°F to 104°F, with 5-95% non-condensing humidity
• Built to withstand demanding environments with IP20 ingress protection
• Easy installation and module swapping within RigDim enclosures
• Installation requires power to be off; professional installation recommended

Specifications

Electrical

• Operating Voltage: 120VAC, 50/60Hz
• Number of Circuits: 4
• Min Rated Load (per circuit): 60W
• Max Rated Load (per circuit): 53805-136: 2000W
• Operating Voltage: 277VAC, 50/60Hz
• Number of Circuits: 4
• Min Rated Load (per circuit): 140W
• Max Rated Load (per circuit): 53805-236: 4000W
• Supported Loads: Advance Mark 7 Ballasts
• Cooling: Natural convection
• Ambient Operating Temperature: 32-104F
• Relative Humidity: 5-95% non-condensing