Shure's PG58-XLR is a rugged microphone tuned to accentuate the clarity of lead and back-up vocals. It includes a 15 ft (4.57m) XLR to XLR cable, microphone clip, 5/8" to 3/8" thread adapter, and storage bag.
Features:
- Cardioid polar pattern picks up the most sound from in front of themicrophone and some sound from the sides. Less susceptible to feedback in highvolume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levelswithout distortion.
- Cartridge includes a neodymium magnet for high output level.
- Tailored frequency response is smooth and extended. Tuned specifically forvocal applications.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
- Hardened steel mesh ball grille that resists wear and abuse.
- Integral "pop" filter reduces explosive breath sounds and wind noise.
- Includes 15ft (4.57m) cable, break-resistant mic clip and storage bag.
Specifications:
- Frequency Response: 60 Hz to 15 kHz
- Polarity: Positive pressure on diaphragm produces positive voltage on pin2 relative to pin 3 of microphone output connector
- Output Impedance (at 1000 Hz): 300 ohms
- Sensitivity (at 1000 Hz): -53 dBV/Pa, (2.2 mV), 1Pascal=94 dB SPL
- Electromagnetic Hum Sensitivity: 26 dB equivalent SPLin a 1 millioerstedfield (60 Hz)
- Switch: Built-in On/Off switch
- Connector: Three-pin professional audio connector (male XLR type)
- Case: Die cast metal handle, black matte finish; hardened silver colored,spherical steel mesh grille
- Environmental Conditions: This microphone operates over a temperaturerange of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at arelative humidity of 0 to 95%.
- Weight: Net: 321 g (11.3 oz); Packaged: 908 g (2 lb)