Vinten FHR-155 VR - VR/AR-Enabled Robotic Head with 359-Degree Pan and 50-Degree Tilt for 155-Pound Payloads in Black Finish

The Vinten FHR-155 VR is a high-precision robotic pan and tilt head engineered specifically for professional VR and AR production environments. Designed to support up to 155 lbs, this fully robotic system combines advanced mechanical design with built-in 22-bit encoders to deliver the positional accuracy required for real-time camera tracking in virtual studios, immersive broadcast sets, and XR production workflows. It provides exceptional reliability and silent operation, making it ideal for both on-location and in-studio use where environmental noise must be kept to a minimum.

The FHR-155 VR outputs highly accurate tracking data over Ethernet UDP or Serial RS232/422 interfaces, providing seamless integration with virtual engine platforms. The ultra-high-resolution 22-bit encoders deliver precise motion data with sub-degree accuracy, enabling the system to map pan and tilt movements into 3D space with repeatable precision of ±0.016°. With a broad motion range of 359° pan and ±50° tilt, the FHR-155 VR accommodates wide camera moves while maintaining consistent output to match CG and virtual backgrounds in real time.

Engineered for use with Canon, Fujinon, and other digital lens systems, the FHR-155 VR supports both digital and analog lens control protocols, allowing for remote manipulation of zoom, focus, and iris within VR pipelines. The system includes a standard cradle to ensure proper balance and reduce load stress during extended moves or continuous operation. It features a built-in 3-port Ethernet switch to simplify connectivity with IP-based robotic pedestals, prompting systems, or centralized control hubs, reducing the need for additional network gear on set.

Robustly built for broadcast and studio environments, the FHR-155 VR features an IP40-rated housing and operates in ambient temperatures ranging from 41°F to 104°F. Its compact form factor - measuring 17.2 x 19.3 x 9.3 inches - and total weight of 49.3 lbs with cradle make it suitable for integration into a wide variety of rigging platforms. Consuming 175W of power and accepting universal 100-240VAC input, the system is globally compatible. A separate mounting adapter is required for installation onto standard tripods or pedestals, ensuring flexible deployment options across various production setups.

Features

• Robotic pan and tilt head designed for VR/AR integration with 22-bit encoders
• Outputs high-resolution motion data via Ethernet UDP or RS232/422 protocols
• Supports up to 155 lbs for large cameras, prompters, and lens packages
• ±50° tilt and 359° pan range for full framing and shot flexibility
• Motion repeatability of ±0.016° with system resolution finer than 0.01°
• Near-silent operation rated at 41 dBA for sound-sensitive studio environments
• Digital and analog lens control compatibility for Canon, Fujinon, and others
• Standard cradle included for center-of-gravity balance and optimal motion response
• Integrated 3-port Ethernet switch for simplified network and control system integration
• Optimized for robotic-only operation with no manual control features
• Requires optional mounting adapter for use with tripods or pedestals
• Power input of 100-240VAC and 175W power consumption for global deployment
• IP40-rated with 17.2 x 19.3 x 9.3 inch dimensions and 49.3 lb total weight
• Temperature operating range of 41°F to 104°F for studio and remote use

Specifications

Operation

• Motor Noise: 41 dBA @ Max speed
• Tilt Range: ± 50° (payload dependent)
• Pan Range: 359°
• Angular Velocity (Maximum): 60° per second
• Angular Acceleration (Typical): 60° per second
• Angular Acceleration (Peak): 120° per second
• Shot Recall Repeatability: ± 60 arcseconds (±0.016°)
• System Resolution/Accuracy: 19 Bit, 0.2°
• Manual Control: No
• Drag: No
• Lens Control: Digital control for most Fujinon, Canon and other Digital lenses, Analogue control for high quality lenses as appropriate.
• Network: IP Ethernet, RJ45
• Genlock: Black burst/tri-level, Micro BNC
• Auxilary Port: 26 pin (configurable)
• VR Tracking Data Output: Ethernet UDP or Serial RS232/422

Electrical

• Power Consumption: 175W
• Power Input: 100-240VAC, 50/60 Hz

Physical

• Maximum Payload: 155 lbs
• Cradle: Standard
• IP Rating: IP40
• Temperature Range: 41F to 104F
• Rated Load Inertia: 178 lbs sq/ft
• Height: 19.3 inches
• Length: 17.2 inches
• Width: 9.3 inches
• Weight: 39.6 lbs (without cradle), 49.3 lbs (with cradle)