Vinten FHR-155 Robotic VR Pan and Tilt Tripod Head with 22-Bit Encoder

The Vinten FHR-155 Robotic Head is a fully functional robotic head. Suitable for studio or remote work, the head is nearly silent and supports up to 155 pounds. It features built-in 22-bit encoders that output precise information for incorporating the head's movements into VR shots. It has a cradle to adjust the center of gravity and balance of your camera on the head for best results. The head features accurate and highly repeatable motion control of the camera as well as compatible Canon and Fujinon servo-controlled lenses.

The head can tilt a total of 100° (50° down and 50° up), and can pan 359°. The built-in 3-port Ethernet switch simplifies integration with robotic pedestals and IP prompting equipment. Mounting the head on a tripod or pedestal requires an optional mounting adapter.

Features

• Near-Silent Robotic Operation
• Supports up to 155 Pounds
• 22-Bit Encoding for Use with VR Engines
• Smooth Camera and Lens Motion Control
• Canon and Fujinon Servo Lens Control
• Accurate and Repeatable at All Speeds
• ± 50° Tilt, 359° Pan
• 3-Port Ethernet Switch
• Mounting Adapter Required

Specifications

Physical Data

• Max. payload: 70 kg (155 lb)
• Cradle: Standard
• Height: 490 mm (19.3 in.)
• Length: 436 mm (17.2 in.)
• Width: 235 mm (9.3 in.)
• Weight: 22.5 kg (50 lb)
• Rated Load Inertia: 7.5 kg m2 (178 lb ft2)

Operating Data

• Temperature range, IP: 41°F to 104°F, IP40 non-condensing
• Motor noise: 41dBA @ Max speed
• Tilt range: ±50° (payload dependent)
• Pan range: 359°
• Angular velocity (min): 0.05°/s
• Angular velocity (max): 60°/s
• Angular acceleration (typical): 60°/s2
• Angular acceleration (peak): 120°/s2
• Shot Recall Repeatability: ±60 arcseconds (±0.016˚)
• VR System Resolution Accuracy: 22 Bit, >0.01˚ where fitted
• Manual Control: No
• Drag: No
• Lens Control: Full-servo Canon and Fujinon lenses
• Network: IP Ethernet, RJ45
• Genlock: Black burst/tri-level, Micro BNC
• Aux port: 26 pin (configurable)
• VR Tracking Data Output: Option, Ethernet UDP or Serial RS232/422

Electrical Data

• Power Consumption: 175W
• Power Input: Autoranging 100–240V AC, 50/60 Hz