Martin Professional Jem Hazer Pro - 600W Water-Based Haze Machine with Built-in Remote and DMX

The Martin JEM Hazer Pro is a top of the range water-based haze machine designed for the highly demanding professional market. Its ability to produce exceptionally fine atmospheric haze in a short period of time while operating at low noise levels makes it an ideal choice for rental houses, medium to large shows, theatres, TV studios, clubs, bars, cruise ships, theme parks and more.

The Martin JEM Hazer Pro is capable of dispersing an even, continuous haze with superior optical clarity and reflectivity, the perfect small-particle haze for highlighting today’s highly defined light beams.

Martin JEM Hazer Pro Features:

• Continuous effect output.
• Water-based fluid provides dense particles and even haze.
• Sealed fluid system with quick-connect fittings.
• 2.5 liter fluid reservoir -  10.5 hours on full output.
• User-friendly on-board digital control panel.
• Pre-programmed "silent" mode. 
• Independent  variable haze and fan control.
• DMX Control with RDM Standard.
• Road-worthy industrial design.
• Lightweight and small footprint.  
• Optional Flying Kit and Digital Remote Control.
•  Battery powered automatic shutdown system - prevents clogging.

Martin JEM Hazer Pro Specifications:

Physical

• Length: 565 mm (22.3 in.)
• Width: 271 mm (10.7 in.)
• Height: 298 mm (11.8 in.)
• Height with rigging kit: 294 mm (11.6 in.)
• Dry weight: 15 kg (33.1 lbs.)
• Filled weight: 17.5 kg (38.6 lbs.)

Performance

• Coverage volume: 5500 m3 (194,231 ft3) per minute
• Operating time with 2.5 l fluid (minimum/maximum): 10.5/65 hours
• Operating time: Continuous
• Ready time: 6 minutes
• Ambient noise: Silent mode

Control & Programming

• Control options: Digital control panel, programmable fast access keys, DMX, optional digital remote control, master/slave link mode
• Control parameters: Continuous or timer-controlled output
• Haze and fan: Independent variable output, 0-100%
• DMX channels: 3 (Haze, Fan, Control)
• Self cleaning cycle: Battery powered automatic shutdown, manually engaged, or DMX
• DMX compliance: ANSI E1.11 - USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20 RDM

Construction

• Housing: Steel and aluminum
• Color: Black
• Heat exchanger: 600 W trackless heat exchanger, thermally protected
• Blower fan: Integrated, 200-2500 RPM
• Fluid pump: Oscillating piston, high pressure
• Fluid management: Fluid out sensing, sealed for transportation
• Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting

Installation

• Mounting: Standing or optional flying kit
• Orientation: Up to +/- 30° from horizontal
• Clearance around machine: 100 mm (4.0 in.)

Connections

• AC power: Neutrik PowerCon
• DMX, link mode in/out: 3-pin and 5-pin locking XLR
• Remote control: 3-pin locking XLR
• Firmware: AVR socket

Electric

• AC power: 100-130 V, 50/60 Hz
• Main fuse: 10 AT (slow blow), 125 V
• Typical power and current: 675 W, 6 A*
• *Measurements made at nominal voltage. Allow for a deviation of +/- 10%

Thermal

• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min): 5° C (41° F)
• Exterior surface temperature, steady state: 30° C (86° F)
• Maximum nozzle temperature: 290° C (554° F)

Approvals

• EU EMC: EN 61000-6-3:2001
• EU safety: EN 60 335-1+A15, EN 62233
• EU Immunity: EN 61000-6-1
• US safety (pending): UL 998
• Canadian Safety (pending): CSA C22.2 No. 104-01
• Australia/NZ: C-Tick N4241
• Calibration factors have been developed and approved by the Actors’ Equity Association and the Broadway League for use in measuring theatrical haze with the JEM Hazer Pro™ and JEM C-Plus Haze Fluid™:

Ordering Information

• JEM™ Hazer Pro, US: P/N 92225945