Martin Professional JEM ZR25 - 1150W Water-Based Fog Machine with Built-in Timer and DMX

Introducing the JEM ZR25: Your Compact Powerhouse Fog Machine

Experience unmatched fog performance with the JEM ZR25, a compact yet mighty fog machine meticulously engineered to excel in the most demanding professional settings. With its robust 1,150 W heat exchanger, the JEM ZR25 effortlessly generates copious amounts of fog, making it the perfect choice for small to medium-sized venues and stages in both installation and rental scenarios.

The JEM ZR25 stands out with its versatility, offering variable output control to craft subtle and captivating effects. It keeps pace with the times by featuring an integrated digital remote control and seamless DMX with RDM support, providing you with precise and convenient control options.

What sets the JEM ZR range apart is its compatibility with a broad spectrum of JEM Pro fog fluids. These machines are not just performers; they're built to endure, consistently delivering impressive output while keeping power consumption at a minimum. Choose the JEM ZR25 for a fog experience that exceeds expectations, every time.

Martin JEM ZR25 Features:

• 1,150 W heat exchanger
• 40 ml in 30 seconds peak performance
• 600 m³/min fog output
• Variable output control for subtle effects
• 7-8 minute warm-up time
• Digital remote, DMX and RDM
• Compatible with a wide range of JEM Pro fog fluids
• Floor standing or truss mounting (bracket included)
• PowerCON TRUE1
• 2.5-liter bottle

Martin JEM ZR25 Specifications:

Physical

• Length: 485 mm (19.1 in.)
• Width: 335 mm (13.2 in.)
• Height: 242 mm (9.6 in.)
• Height with hanging bracket: 333 mm (13.2 in.)
• Weight, dry: 11.2 kg (24.7 lbs.)
• Weight, filled: 13.7 kg (30.2 lbs.)

Performance

• Continuous effect output
• Coverage volume: 600 m3 (21,189 ft3) per minute
• Fluid consumption (max.): 100 ml per minute
• Maximum operating time, maximum output, 2.5 l of fluid: 1.2 hours
• Ready time: 7-minutes

Control and Programming

• Control options: Integrated digital remote control, DMX, master/slave link mode
• Control parameters: Continuous or timer-controlled output
• Fog: Variable output control, 0-100%
• DMX channels: 1
• External fluid control: Fluid sensing
• DMX compliance: ANSI E1.11 - USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20 RDM

Construction

• Housing: Steel and aluminum
• Hanging bracket: Integrated yoke with safety attachment point
• Color: Black
• Heat exchanger: 1150 W, thermally protected
• Fluid pump: Oscillating piston, high pressure
• Fluid management: Fluid out sensing, sealed for transportation
• Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
• External fluid control: Fluid sensing
• Remote control: Integrated digital remote with 3 m (9.84 ft.) cable, 3-pin XLR connector

Installation

• Mounting: Standing or hanging
• Orientation: Up to +/-40° from horizontal
• Clearance around machine: 100 mm (4 in.)

Connections

• AC power: Neutrik PowerCON True1
• DMX and link mode in/out: 5-pin locking XLR
• Remote control: 3-pin locking XLR
• Firmware: AVR socket

Electrical

• AC power: 100-130 V nominal, 50/60 Hz
• Main fuse: 10 AT (slow blow), 125 V
• Typical power and current: 1050 W, 8.8 A*

Thermal

• Minimum ambient temperature (Ta min.): 5° C (41° F)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Exterior surface temperature, steady state: 30° C (86° F)
• Maximum nozzle temperature: 290° C (554° F)

Approvals

• US safety: UL 998
• Canadian safety: CSA C.22.2 No. 104.01