Currency
|
|
|
Enttec D-Split - 4-Port Isolated DMX Splitter with 2x 3-Pin and 2x 5-Pin DMX
$133.00
The D-Split is an optically-isolated DMX splitter and repeater for DMX512. With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32 DMX fixtures.
SKU
70578
The D-SPLIT is a 1 to 4 DMX 512 splitter, allowing you to send your signal in different directions or to increase the number of fixtures that you can send your signal to (DMX signal is limited to running through 32 fixtures).
Run your DMX cable to the Male DMX Input (only one input), the D-SPLIT will duplicate the signal on each of the four outputs. The D-SPLIT outputs are optically isolated, meaning that that it protects against up to 1000V of stray voltage, protecting your DMX controller and fixtures on the other D-SPLIT outputs.
The D-SPLIT can provide more flexibility in connecting DMX controlled devices. Instead of having to make them all fit within a single daisy chain, each of the four outputs from the D-SPLIT can be the start of its own chain, and multiple D-SPLITs can be linked together if needed.
Features
- Lightweight and portable.
- 1 DMX input, Both SKU's offer flexibility of 3-Pin and 5-Pin male connector for connection to only 1 DMX input.
- 4 DMX outputs: 2x 5-PIN and 2x 3-PIN outputs for greater flexibility.
- All outputs are optically isolated (protects against up to 1000V of stray voltage).
- DMX512-1990 compatible.
- Controls up to 512 channels
- Daisy chain via input ports without utilizing any output ports
- LED indicators when powered.
- External power supply (included).
Specifications
- Connectors: Input 1x 5 Pin DMX, 1x 3 Pin DMX
- Output: 2x 3 Pin DMX, 2x 5 Pin DMX
- IP rating: IP20
- LED indicators: Power & Data Output
- Input Protocol: USITT DMX512-1990
- Output Protocol: USITT DMX512-1990
- RDM compatibility: No
- Max channel: 512 channels (1 Universe)
- Input Voltage: 7V-24VDC
- Maximum Current: 400mA
- Environmental operating temperature: 32°F to 122°F
- Environmental operating humidity: 5- 95% (non-condensing)
- Body material: ABS plastic
- Unit dimensions: 116 x 87 x 52mm
- Unit weight: 0.35lbs
- Shipping dimensions: 235 x 160 x 68mm
- Shipping weight: 0.5kg / 1.10lbs
- Warranty: 1 year return to base manufacturer warranty