International Shipping Available

PRICING SUBJECT TO CHANGE WITHOUT NOTICE DUE TO POTENTIAL IMPORT COST FLUCTUATIONS

NovaStar MX20 - LED Display Controller with 6 Ethernet Ports and 3.9 Million Pixel Load Capacity

NovaStar MX20 - LED Display Controller with 6 Ethernet Ports and 3.9 Million Pixel Load Capacity

NovaStar MX40 Pro - LED Display Controller with 20 Ethernet Ports and 9 Million Pixel Load Capacity

NovaStar MX40 Pro - LED Display Controller with 20 Ethernet Ports and 9 Million Pixel Load Capacity

NovaStar MX30 - LED Display Controller with 10 Ethernet Ports and 6.5 Million Pixel Load Capacity

$2,875.00
The MX30 is an all-in-one LED display controller in the brand-new control system COEX series of Novastar.
SKU
BLZ-124465
UPC
685450875998

The MX30 is an all-in-one LED display controller in the brand-new control system COEX series of Novastar. This controller integrates video processing and video control into one box and offers rich video input connectors (HDMI 2.0, HDMI 1.4, DP 1.1 and 3G-SDI), 10x Ethernet output ports and 2x 10G optical ports. It can also work with the brand-new software VMP (Vision Management Platform) to provide a better operation and control experience.

Features

  • Multiple types of inputs − 1x HDMI 2.0 (with loop through), 1x HDMI 1.4 (with loop through), 1x DP 1.1, 2x 3G-SDI (with loop through)
  • 10-bit and 8-bit video inputs
  • 3 types of outputs - 10x Gigabit Ethernet ports (load capacity up to 6.5 million pixels), 2x 10G optical ports, 1x SPDIF digital audio port
  • 3 types of controls - 1x Genlock signal input (with loop through), 2x Ethernet control ports, 1x Auxiliary port
  • 3 independent layers - Support up to 3 layers and layer priority adjustment in Z order.
  • Image scaling - Support 4 image scaling modes: custom, pixel to pixel, snap to canvas and fill screen.
  • 14Ch Color Correction - Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colors of the red, green and blue primary colors.
  • Full-Grayscale Calibration - Work with NovaStar's high-precision calibration system and the C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity of each grayscale and dramatically improving the image quality.
  • HDR − Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards.
  • Latency - Support low latency and the controller load capacity is not reduced. The latency at the controller is 0 frame (less than 1 ms) in Send- Only Controller working mode and 1 frame in All- In-One Controller working mode.
  • No rectangle restriction - No rectangle restriction for irregular screens. This means when calculating resolutions, blank pixels do not count towards the total capacity. The used load capacity of Ethernet ports is the sum of the resolutions of all cabinets.
  • Frame Rate Adaptive - The controller can be adaptive to various video input frame rates, including decimal frame rates. Custom frame rates are also supported and the step size of fine tuning frame rate is as small as 0.01 Hz.
  • Two working modes - Support the All-In-One Controller and Send-Only Controller working modes. (In the Send-Only Controller mode, the latency can be reduced by one frame. In the All-In-One Controller mode, the layer and scaling functions are available.)

Specifications

Electrical Specifications

  • Power input: 100-240V~, 50/60Hz, 2- 0.8A
  • Maximum power consumption: 55 W

Operating Environment

  • Temperature: ?20?C to +50?C
  • Humidity: 0% RH to 80% RH, non-condensing

Storage Environment

  • Temperature: ?30?C to +80?C
  • Humidity: 0% RH to 95% RH, non-condensing

Physical Specifications

  • Dimensions: 482.6 mm x 94.2 mm x 466.7 mm
  • Net weight: 7.2 kg
  • Gross weight: 10.2 kg

Packing Information

  • Packing box: 660.0 mm x 570.0 mm x 210.0 mm, kraft paper box
  • Accessory box: 408.0 mm x 290.0 mm x 50.0 mm, white cardboard box
  • Accessories: 1x Power cord, 1x Ethernet cable, 1x HDMI cable, 1x DP cable, 1x Certificate of Approval