NovaStar MX40 Pro - LED Display Controller with 20 Ethernet Ports and 9 Million Pixel Load Capacity

The MX40 is an all-in-one LED display controller in the brand-new control system COEX series of Novastar. This controller integrates video processing and video control into one box and offers rich video input connectors (HDMI 2.0, DP 1.2 and 12G-SDI), 20x Ethernet output ports and 4x 10G optical ports. It can also work with the brand-new software VMP (Vision Management Platform) to provide a better operation and control experience

Features

• 3 types of inputs − 3x HDMI 2.0 (with loop through), 1x DP 1.1, 1x 12G-SDI (with loop through)
• 12-bit, 10-bit and 8-bit video inputs
• 3 types of outputs - 20x Gigabit Ethernet ports (load capacity up to 9 million pixels), 4x 10G optical ports (2 as primary and 2 as backup ports), 1x SPDIF digital audio port
• 3 types of controls - 1x Genlock signal input (with loop through), 2x Ethernet control ports, 1x Auxiliary port
• 4 independent layers - Support up to 4x 4K layers and layer priority adjustment in Z order.
• Image scaling - Support 4 image scaling modes: custom, pixel to pixel, snap to canvas and fill screen.
• Color Replacement - Support free replacement of any color on the image without affecting the performance of other colors. Replacement of highly saturated colors is recommended for better effect.
• 14Ch Color Correction - Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colors of the red, green and blue primary colors.
• Curves - Support adjustment to the image RGBW mapping curves.
• 3D LUT - The 17x17x17 3D LUT .cube files are supported to adjust the video source colors.
• Dynamic Booster - Real-time analysis and dynamic adjustment are made to each frame to significantly improve the display contrast and image details for better visual experience, and effectively control and lower the display power consumption, extending the service life of the LED screen.
• Full-Grayscale Calibration - Work with NovaStar's high-precision calibration system and the C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity of each grayscale and dramatically improving the image quality.
• HDR − Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards.
• Latency - Support low latency and the controller load capacity is not reduced. The latency at the controller is 0 frame (less than 1 ms) in Send- Only Controller working mode and 1 frame in All- In-One Controller working mode.
• 3D - Work with the specified receiving cards, 3D emitter and 3D glasses to bring a fascinating and immersive 3D viewing experience.
• No rectangle restriction - No rectangle restriction for irregular screens. This means when calculating resolutions, blank pixels do not count towards the total capacity. The used load capacity of Ethernet ports is the sum of the resolutions of all cabinets.
• Frame Rate Adaptive - The controller can be adaptive to various video input frame rates, including decimal frame rates. Custom frame rates are also supported and the step size of fine tuning frame rate is as small as 0.01 Hz.
• Two working modes - Support the All-In-One Controller and Send-Only Controller working modes. (In the Send-Only Controller mode, the latency can be reduced by one frame. In the All-In-One Controller mode, the layer and scaling functions are available.)
• Display system monitoring - Support monitoring of the device status and screen status. Any fault and alarm information can be reported actively.

Specifications

Electrical Specifications

• Power input: 100-240V~, 50/60Hz, 2- 0.8A
• Maximum power consumption: 95 W

Operating Environment

• Temperature: ?20?C to +50?C
• Humidity: 0% RH to 80% RH, non-condensing

Storage Environment

• Temperature: ?30?C to +80?C
• Humidity: 0% RH to 95% RH, non-condensing

Physical Specifications

• Dimensions: 482.6 mm x 94.2 mm x 467.0 mm
• Net weight: 7.5 kg
• Gross weight: 10.5 kg

Packing Information

• Packing box: 660.0 mm x 570.0 mm x 210.0 mm, kraft paper box
• Accessory box: 408.0 mm x 290.0 mm x 50.0 mm, white cardboard box
• Accessories: 1x Power cord, 1x Ethernet cable, 1x HDMI cable, 1x DP cable, 1x Certificate of Approval